Separation of H2 and CO through poly(sulfone-amide) membranes.

Molecular Sieve Silica Membranes For H2/CO Separation

Membranes have been used for gas separation for quite some time but have seen major growth during the 90’s [1]. For many industrial applications involving gas streams, it is important that membranes resist high temperatures and corrosive environments. As in Table 1, organic membranes are not heat resistant at high temperatures while zeolite membranes have pore sizes too large to separate gases ...

Polysulfone membranes for CO2/CH4 separation: State of the art

The world market for CO2/CH4 separation using membrane technology is getting bigger and polysulfone (PSf) is one of the most widely investigated polymer membrane materials. However, the existing PSf membranes performances are insufficient to fully exploit these opportunities. Therefore, modification that would produce membrane that fit the needs of target separation performances is a main issue...

Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes

The main goal of this work was to synthesize and evaluate the effect of dehydration temperature on the potential application of hydroxy sodalite zeolite membrane. Hydroxy sodalite zeolite membranes were synthesized via direct hydrothermal method onto a tubular alumina support without seeding in a hot air oven. The synthesized membranes were characterized by X-ray diffraction (XRD) and scanning ...

Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation

Removal of Methylene Blue from Water by Polyacrylonitrile Co Sodium Methallylsulfonate Copolymer (AN69) and Polysulfone (PSf) Synthetic Membranes

Polyacrylonitrile-co-sodium methallylsulfonate copolymer (AN69) and polysulfone (PSf) synthetic membranes were prepared and used for the removal of methylene blue (MB) from water. Atomic Force Microscopy (AFM), Ionic exchange capacity (IEC), and Swelling ratio (Sr) were employed to determine the membrane characteristics. pH, membrane composition and initial dye concentration were used for t...