Separation of Cracked Kerosene by Liquid-liquid Extraction —Measurement of Liquid-liquid Equilibrium—
نویسندگان
چکیده
منابع مشابه
Solid-liquid separation after liquid-liquid extraction.
A low-melting solid is used as organic solvent for liquid-liquid extraction at elevated temperatures followed by solidification and decantation of the aqueous phase.
متن کاملLiquid - Liquid Extraction of 2, 3-Butanediol from Fermentation Broth
Recovery of metabolites from fermentation broth by solvent extraction can be used to optimize fermentation processes. End-product reutilization, low product concentration, large volumes of fermentation broth and the requirements for large bioreactors, in addition to the high cost largely contributed to the decline in fermentative 2, 3-butanediol production. Extraction can ...
متن کاملStagewise Modeling of Liquid-Liquid Extraction Column (RDC)
Stagewise forward mixing model considering coalescence and redispersion of drops was used to predict the performance of Rotating Disc Liquid-Liquid Extraction Contactors. Experimental data previously obtained in two RDC columns of 7.62cm diameter, 73.6cm height and 21.9cm diameter, 150cm height were used to evaluate the model predictions. Drop-side mass transfer coefficients were predicted appl...
متن کاملLiquid-liquid equilibrium data prediction using large margin nearest neighbor
Guanidine hydrochloride has been widely used in the initial recovery steps of active protein from the inclusion bodies in aqueous two-phase system (ATPS). The knowledge of the guanidine hydrochloride effects on the liquid-liquid equilibrium (LLE) phase diagram behavior is still inadequate and no comprehensive theory exists for the prediction of the experimental trends. Therefore the effect the ...
متن کاملLiquid-Liquid Extraction Using the Composition-Induced Phase Separation Process
This paper describes a new separation process of liquid-liquid extraction. It consists of first mixing the system to be extracted with a primary solvent, which is soluble with the native solvent, and subsequently adding a modifier, which is insoluble with either the native or the primary solvent. This process is similar to the phase transition extraction, which was described in a previous paper...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Petroleum Institute
سال: 2012
ISSN: 1346-8804,1349-273X
DOI: 10.1627/jpi.55.241