Separation Mechanism of Round Nozzle Cascade Impactor
نویسندگان
چکیده
منابع مشابه
Deposition Dosages of Three Cromolyn Forms by Cascade Impactor
Among inhaled asthma therapies, the present study aimed to identify factors for selecting the type of inhalation therapy for asthma. Three methods are used to deliver inhaled cromoglycate, and the airway deposition rate was evaluated using a cascade impactor with 3 dosage forms: dry powder (DP), pressurized metered dose inhaler (pMDI), and solution (jet- and mesh-types). The percentage of parti...
متن کاملMedical nebulizer performance: effects of cascade impactor temperature.
BACKGROUND During operation of a jet nebulizer, the temperature of the nebulizer outlet could decrease by more than 10 degrees C, depending on the nebulizer type and operating conditions, such as driving flow rate and fill volume. The droplet size distribution generated from the nebulizer can be measured by a cascade impactor. However, when the cascade impactor is operated at ambient room tempe...
متن کاملInstability of shock-induced nozzle flow separation
We investigate experimentally the causes of jet plume instability and enhanced mixing observed in the exhaust of shock-containing convergent-divergent nozzles. Key features of the internal flow are the separation shock, separation shear layers, and pattern of alternating expansion and compression waves downstream of the shock. We focus on two possible reasons for this instability—the motion of ...
متن کاملNumerical Investigation of Supersonic Nozzle Flow Separation
S EPARATION of supersonic flow in a convergent–divergent nozzle is a fundamental fluid phenomenon that affects a large variety of applications, from fuel systems to aircraft engine nozzles. When a supersonic nozzle is operated at pressure ratioswell below its design point, a shock forms inside the nozzle andflowdownstreamof the shock separates from the nozzle walls. Even though flow separation ...
متن کاملUnsteady Phenomena in Supersonic Nozzle Flow Separation
This work considers the instability of the jet plume from an overexpanded, shockcontaining convergent-divergent nozzle and attempts to correlate this instability to internal shock-induced separation phenomena. Time resolved wall pressure measurements and Pitot measurements are used as primary diagnostics. For the conditions of this study flow separation is asymmetric resulting in a large separa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical engineering
سال: 1970
ISSN: 0375-9253
DOI: 10.1252/kakoronbunshu1953.34.427