Sensor and Instrumentation for Cable Tension Quantification
نویسندگان
چکیده
منابع مشابه
Cable Tension Sensor Based on Magneto-elastic Effect
Cable Tension Sensor Based on Magneto-elastic Effect Sun Zhiyuan Dept. of Instrument Development , Institute of Engineering Mechanics, Harbin. China Email:[email protected] ABSTRACT: This article introduces a sensor based on magneto-elastic effect in order to measure the axial tension of steel cable. We explained the basic principle of the sensor in detail, designed and analyzed the magneti...
متن کاملA Promising Enhanced Polymer Modified Voltammetric Sensor for the Quantification of Catechol and Phloroglucinol
In the present paper, poly(Tyrosine) modified graphene paste electrode (PTMGPE) was fabricated by utilizing an electropolymerization technique. Deposition of polymer film at bare graphene paste electrode (BGPE) was characterized by field emission scanning electron microscopy (FE-SEM). The PTMGPE was applied for Voltammetric detection of catechol (CC) and its quantification in phosphate buffer s...
متن کاملTension Optimization for a Cable-Driven Parallel Robot with Non- Negligible Cable Mass
This paper addresses the cable tension distributions of a cable-driven parallel robot with non-negligible cable mass for large dimension mechanisms. A well-known model which describes the profile of a cable under the action of its own weight allows us to take the cable sags into account. In addition, an approach to computing the cable tensions is presented, in which there are two major steps to...
متن کاملA System for Tension Monitoring in Cable-Based Parallel Architectures
In this papercable-based architectures are classified as active (i.e. cable parallel robots) and passive (wirebased measuring systems). For both classes the identification of applied/exerted wrenches is of fundamental importance for the use and feasible operation of the system. A suitable model and low-cost easy operation system for tension monitoring are proposed for experimental validation fo...
متن کاملCable-Stayed Bridges: A Case Study for Vibration-Based Cable Tension Estimation
A cable-stayed bridge recently constructed by the Ohio Department of Transportation incorporates measures put forth by a Federal Highway Administration study to mitigate stay motion. In following recent trends, the stays at this bridge are built without the use of grout for the purposes of inspection and, if necessary, replacement. Several experiments were performed to determine the viability o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2014
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2014.11.728