Sensitivity-based finite element model updating with natural frequencies and zero frequencies for damped beam structures
نویسندگان
چکیده
منابع مشابه
Structural Damage Identification of Plate Structures based on Frequency Response Function and Natural Frequencies
In this paper, a structural damage identification method (SDIM) is developed for plate-like structures. This method is derived using dynamic equation of undamaged/damaged plate, in which local change in flexural rigidity is characterized utilizing a damage distribution function. The SDIM requires to modal data in the intact state and frequency response of damage state where most of vibration ba...
متن کاملFrf-based Finite Element Model Updating Method for Non-viscous and Non-proportional Damped System
The modeling of damping is very complex and still considered somewhat an unknown or grey area. Recently, model updating methods has been used to update the damping matrix based on measured dynamic test data to accurately represent energy dissipation mechanism in dynamic systems. Most of the finite element updating methods considers that the dynamic systems are viscous and proportional. In this ...
متن کاملA NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
متن کاملfinite element model updating of a frame with direct and sensitivity-base methods
this paper presents an overview of model updating and particularly its application for updating of frame model. in this article a mathematical model of the frame was produced with finite element method. the frame was subjected to hammer modal testing. then the results of the modal testing were compared with those predicted with the model. this comparison revealed discrepancies between these two...
متن کاملCalculation of Buckling Load and Eigen Frequencies for Planar Truss Structures with Multi-Symmetry
In this paper, the region in which the structural system is situated is divided into four subregions, namely upper, lower, left and right subregions. The stiffness matrix of the entire system is then formed and using the existing direct symmetry and reverse symmetry, the relationships between the entries of the matrix are established. Examples are included to illustrate the steps of the method.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Naval Architecture and Ocean Engineering
سال: 2014
ISSN: 2092-6782
DOI: 10.2478/ijnaoe-2013-0221