Sensitivity Analysis of 2002 Design Guide Distress Prediction Models for Jointed Plain Concrete Pavement

Global Sensitivity Analysis of Jointed Plain Concrete Pavement Mechanistic-Empirical Performance Predictions

The new AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) provides pavement analysis and performance predictions for various what-if scenarios. MEPDG performance predictions for anticipated climatic and traffic conditions will depend on the values of the input parameters that characterize pavement materials, layers, design features, and condition. A comprehensive global sensitivity ana...

Sensitivity quantification of jointed plain concrete pavement mechanistic-empirical performance predictions

Effect of PCC Material Properties on MEPDG Jointed Plain Concrete Pavement (JPCP) Performance Prediction

This paper focuses on comprehensive sensitivity analyses of various rigid pavement scenarios. Jointed Plain Concrete Pavement ( JPCP) sections designed for three traffic levels in each of five climate zones are evaluated in the sensitivity analyses. One-at-a-time (OAT) local sensitivity analysis was implemented using a design limit normalized sensitivity index (NSI) to provide both quantitative...

Calibration of Pavement ME Design and Mechanistic-Empirical Pavement Design Guide Performance Prediction Models for Iowa Pavement Systems

The AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) pavement performance models and the associated AASHTOWare® Pavement ME Design software are nationally calibrated using design inputs and distress data largely from the national Long-Term Pavement Performance (LTPP). Further calibration and validation studies are necessary for local highway agencies’ implementation by taking into acc...

Smoothness variations in early-age jointed plain concrete pavements

This paper discusses the variations in the early-age pavement smoothness at different measurement times and locations in three jointed plain concrete pavements ( JPCPs) representing different ranges of construction times. Surface profile measurements were made during the early morning and late afternoon hours at different locations of the instrumented JPCPs during the first 7 d after constructi...