Semiconductor Device as Optical Demultiplexer for Short Range Optical Communications

Short-range Optical Communications using 4-PAM

As the demand for ever higher throughput short-range optical links is growing, research and industry has shown increased interest in multilevel modulation formats, such as the four leveled pulse amplitude modulation, referred to as 4-PAM. As on-off keying persists to be the choice for low latency applications, such as high performance computing, datacenter operators see 4-PAM as the next format...

Improvement of Optical Properties in Hexagonal Index-guiding Photonic Crystal Fiber for Optical Communications

Waveguides with low confinement loss, low chromatic dispersion, and low nonlinear effects are used in optical communication systems. Optical fibers can also be employed in such systems. Besides optical fibers, photonic crystal fibers are also highly suitable transmission media for optical communication systems. In this paper, we introduce two new designs of index-guiding photonic crystal fiber ...

Optical wireless communications with optical power and dynamic range constraints

Optical Phaselock Receiver with Multigigahertz Signal Bandwidth Indexing Terms. Optical Communications, Optical Receivers, Semiconductor Lasers

Analytic results and conclusion: The throughput of a slotted CSMA is well known to be better than that of unslotted case. C, is always worse than C , because the previous ICMA protocol' is similar to the unslotted CSMA as the ratio of b/a becomes smaller. Both C, and C, of the ICMA scheme will be inferior by 0.368 to the slotted ALOHA, when b / a becomes larger than 6 for C, and 8 for C,, as sh...

Crosstalk and Noise Characteristics of Non-linear Optical Loop Mirror Demultiplexer and Terahertz Optical Asymmetric Demultiplexer

Crosstalk and noise characteristics of non-linear all optical loop mirror (NOLM) demultiplexer and terahertz optical asymmetric demultiplexer (TOAD) are investigated in this paper. The best demultiplexing conditions are studied in order to minimise the crosstalk and noise, and to achieve reduced power penalty for both all-optical demultiplexing schemes.