Semiconductor-based electret sensors for sound and pressure
نویسندگان
چکیده
منابع مشابه
AN1325 Amplifiers for Semiconductor Pressure Sensors
Amplifiers for interfacing Semiconductor Pressure Sensors to electronic systems have historically been based upon classic instrumentation amplifier designs. Instrumentation amplifiers have been widely used because they are well understood standard building blocks that also work reasonably well. For the specific job of interfacing Semiconductor Pressure Sensors to today's mostly digital systems,...
متن کاملAn Electret-based Pressure Sensitive Mos Transistor
The operation of the Metal Oxide Semiconductor Field Effect Transistor (MOSFET) is based on the fact that the lateral conductivity of silicon at the silicon dioxide-silicon interface strongly depends on the transverse electric field in the oxide. Adding a small air-filled spacer between metal gate and oxide, and applying a voltage across the insulator on top of the silicon, the lateral conducti...
متن کاملAN1326, Barometric Pressure Measurement Using Semiconductor Pressure Sensors
The most recent advances in silicon micromachining technology have given rise to a variety of low-cost pressure sensor applications and solutions. Certain applications had previously been hindered by the high-cost, large size, and overall reliability limitations of electromechanical pressure sensing devices. Furthermore, the integration of on-chip temperature compensation and calibration has al...
متن کاملElectrodes for Semiconductor Gas Sensors
The electrodes of semiconductor gas sensors are important in characterizing sensors based on their sensitivity, selectivity, reversibility, response time, and long-term stability. The types and materials of electrodes used for semiconductor gas sensors are analyzed. In addition, the effect of interfacial zones and surface states of electrode-semiconductor interfaces on their characteristics is ...
متن کاملParylene-based electret power generators
An electret power generator is developed using a new electret made of a charged parylene HT R © thin-film polymer. Here, parylene HT R © is a room-temperature chemical-vapor-deposited thin-film polymer that is MEMS and CMOS compatible. With corona charge implantation, the surface charge density of parylene HT R © is measured as high as 3.69 mC m−2. Moreover, it is found that, with annealing at ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Electrical Insulation
سال: 1989
ISSN: 0018-9367
DOI: 10.1109/14.90285