Self-Sensing Paper Actuators Based on Graphite-Carbon Nanotube Hybrid Films
نویسندگان
چکیده
منابع مشابه
Effective post treatment for preparing highly conductive carbon nanotube/reduced graphite oxide hybrid films.
SWCNT-reduced graphite oxide hybrid films were prepared by a filtration method. An efficient post-treatment procedure was designed to reduce GO and remove dispersants simultaneously. The sheet resistance decreased significantly after treatment, by a factor of 4-13 times. Films with excellent performance (95.6%, 655 Ω per square) were obtained and had great potential applications.
متن کاملCarbon Nanotube Paper-Based Electroanalytical Devices
Here, we report on carbon nanotube paper-based electroanalytical devices. A highly aligned-carbon nanotube (HA-CNT) array, grown using chemical vapor deposition (CVD), was processed to form bi-layered paper with an integrated cellulose-based Origami-chip as the electroanalytical device. We used an inverse-ordered fabrication method from a thick carbon nanotube (CNT) sheet to a thin CNT sheet. A...
متن کاملNovel actuators based on polypyrrole/carbide-derived carbon hybrid materials
Polypyrrole (PPy) hybrid films incorporated with porous carbide-derived carbon (CDC) particles are synthesized through a novel one-step electrochemical synthesis process that provides a simple and efficient alternative for current tape-casting and inkjet printing technologies to make conducting polymer-CDC-based electroactive composites. The resulting porous, robust and electrically conductive ...
متن کاملPhotomechanical responses of carbon nanotube/polymer actuators
Recent studies have investigated the photomechanical properties of carbon nanotubes which can be utilized to construct optical actuators. In this paper we compare the photomechanical response from single-wall and multi-wall carbon nanotube/polymer systems in multilayer and nanocomposite actuator constructions. Incorporating polymers in the actuators, single-wall and multi-wall nanotubes show si...
متن کاملSelf-sensing and power harvesting carbon nanotube-composites based on piezoelectric polymers
Recently, the need for long-term structural health monitoring has warranted the design of novel sensing transducers. In particular, nanotechnology offers new material processing techniques that allow for novel multifunctional thin film sensor designs which combine sensing, actuation, and power harvesting into one platform. In this study, single-walled carbon nanotubes (SWNT) are used as filler ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Science
سال: 2018
ISSN: 2198-3844
DOI: 10.1002/advs.201800239