Self-lubricating Ni-P-MoS2 composite coatings
نویسندگان
چکیده
منابع مشابه
Electroless Ni–P composite coatings
This review outlines the development of electroless Ni–P composite coatings. It highlights the method of formation, mechanism of particle incorporation, factors influencing particle incorporation, effect of particle incorporation on the structure, hardness, friction, wear and abrasion resistance, corrosion resistance, high temperature oxidation resistance of electroless Ni–P composite coatings ...
متن کاملThe Effects of Agitation on the Properties of Antifriction Ni-P-MoS2 Composite Coatings
In this work the effects of various methods of agitation on the properties of electroless Ni-P-MoS2 composite coatings were investigated. Magnetic stirring as well as purging the solution with gas (Air, Oxygen, Nitrogen) were used. Plating rate, chemical composition, MoS2 distribution, and hardness of the deposit were measured. Topography of coating was studied with metallography and scanning e...
متن کاملThe Effects of Agitation on the Properties of Antifriction Ni-P-MoS2 Composite Coatings
In this work the effects of various methods of agitation on the properties of electroless Ni-P-MoS2 composite coatings were investigated. Magnetic stirring as well as purging the solution with gas (Air, Oxygen, Nitrogen) were used. Plating rate, chemical composition, MoS2 distribution, and hardness of the deposit were measured. Topography of coating was studied with metallography and scanning e...
متن کاملthe effects of agitation on the properties of antifriction ni-p-mos2 composite coatings
in this work the effects of various methods of agitation on the properties of electroless ni-p-mos2 composite coatings were investigated. magnetic stirring as well as purging the solution with gas (air, oxygen, nitrogen) were used. plating rate, chemical composition, mos2 distribution, and hardness of the deposit were measured. topography of coating was studied with metallography and scanning e...
متن کاملCrN–Ag self-lubricating hard coatings
CrN–Ag composite films, 2.5–4 Am thick, were deposited by reactive magnetron sputtering on Si and stainless steel substrates in a 0.4 Pa pure nitrogen atmosphere at 500 -C. The layer composition was controlled by the relative power to 7.5-cm-diameter Ag and Cr targets to be 0, 3, 12, and 22 at.% Ag. The layers exhibit a dense columnar microstructure where the Ag is homogeneously distributed in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surface and Coatings Technology
سال: 2016
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2016.09.078