Selective hydrocarbon synthesis from syngas on composite catalysts of modified methanol-synthesis catalysts and ZSM-5 zeolites.

single-step synthesis of multi-component spirobarbiturates using ionic liquids and synthesis of substituted pyridine filled with catalysts supported on solid substrate

in this thesis, a better reaction conditions for the synthesis of spirobarbiturates catalyzed by task-specific ionic liquid (2-hydroxy-n-(2-hydroxyethyl)-n,n-dimethylethanaminium formate), calcium hypochlorite ca(ocl)2 or n-bromosuccinimide (nbs) in the presence of water at room temperature by ultrasonic technique is provided. the design and synthesis of spirocycles is a challenging task becaus...

Dehydration of Methanol to Dimethyl Ether Employing Modified H-ZSM-5 Catalysts

Continuous selective oxidation of methane to methanol over Cu - and Fe - modified ZSM - 5 catalysts in a flow reactor

The selective oxidation of methane to methanol is a key challenge in catalysis. Iron and copper modified ZSM-5 catalysts are shown to be effective for this reaction using H2O2 as the oxidant under continuous flow operation. Co-impregnation of ZSM-5 with Fe and Cu by chemical vapour impregnation yielded catalysts that showed high selectivity to methanol (> 92% selectivity, 0.5 % conversion), as ...

Methanol from synthesis gas over bimetallic FePd catalysts

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...

Conversion of Methanol on CuO/H-MOR and CuO/H-ZSM-5 Catalysts.

This paper deals with maximizing dimethyl ether (DME) production from methanol due to its industrial importance as a future diesel fuel. The high acidity and the micro-porous structure of the catalysts encouraged this reaction. Catalysts containg 6% CuO supported on H-ZSM-5 and H-MOR zeolites give high activities for DME production. The 6% CuO/HMOR is more selective for DME production, while th...