Selective extraction of lithium (Li) and preparation of battery grade lithium carbonate (Li2CO3) from spent Li-ion batteries in nitrate system
نویسندگان
چکیده
منابع مشابه
Voltage increase of aqueous lithium-ion batteries by Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic
In this research, a lithium ion conducting lithium aluminum germanium phosphate (LAGP) glass-ceramic with a formula of Li1.5Al0.5Ge1.5(PO4)3 was synthesized by melt-quenching method and subsequent crystallization at 850 °C for 8 h. The prepared glass-ceramic was characterized using X-ray diffraction analysis (XRD) and field emission scanning electron microscopy (FESEM). The XRD patterns exhib...
متن کاملHomogeneity of lithium distribution in cylinder-type Li-ion batteries
Spatially-resolved neutron powder diffraction with a gauge volume of 2 × 2 × 20 mm(3) has been applied as an in situ method to probe the lithium concentration in the graphite anode of different Li-ion cells of 18650-type in charged state. Structural studies performed in combination with electrochemical measurements and X-ray computed tomography under real cell operating conditions unambiguously...
متن کاملSimplified Lithium-Ion (Li+) Battery-Charger Testing - Reference Design - Maxim
Because the charging process for Li+ batteries can take an hour or longer, testing a Li+ battery charger using its natural load (i.e., a battery) is time consuming and inconvenient. This application note presents a simple circuit for simulating the behavior of a Li+ battery, thus providing a more convenient method for testing Li+ battery chargers than using real batteries. A similar version of ...
متن کاملSimplified Lithium-Ion (Li+) Battery-Charger Testing - AN4322
Because the charging process for Li+ batteries can take an hour or longer, testing a Li+ battery charger using its natural load (i.e., a battery) is time consuming and inconvenient. This application note presents a simple circuit for simulating the behavior of a Li+ battery, thus providing a more convenient method for testing Li+ battery chargers than using real batteries. A similar version of ...
متن کاملLi-Rich Li-Si Alloy As A Lithium-Containing Negative Electrode Material Towards High Energy Lithium-Ion Batteries
Lithium-ion batteries (LIBs) are generally constructed by lithium-including positive electrode materials, such as LiCoO2, and lithium-free negative electrode materials, such as graphite. Recently, lithium-free positive electrode materials, such as sulfur, are gathering great attention from their very high capacities, thereby significantly increasing the energy density of LIBs. Though the lithiu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Power Sources
سال: 2019
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2019.01.072