Selection of an Optimal Abrasion Wheel Type for Nano-Coating Wear Studies under Wet or Dry Abrasion Conditions
نویسندگان
چکیده
منابع مشابه
A universal wear law for abrasion
Finding a wear law that is valid over a wide range of conditions and materials would have enormous practical value. The authors have previously iscovered a simple relationship describing the evolution of the abrasive wear rate of steel sliding against boron carbide-coated coupons, and have eveloped a model accounting for its kinetics. The authors show here that this wear equation accurately des...
متن کاملEffect of Wet and Dry Conditions on Wear Behavior of Amorphous Coating of Fe-Cr-Mo-Nb-C-B
Recently, wear resistant properties of metallic glasses has attracted a lot of interest. Because the surface of metallic glasses are prone to phase transformation, finding the effects of test condition on structure and wear behavior of metallic glasses is important. In this research, by using an automated electrospark deposition (ESD), a layer of Fe51Cr18Mo7B16C4Nb4 was deposited on AISI 316l s...
متن کاملABRex - Description of the Abrasion Wear Expert System
In order to solve the wear problem in terms of quality there is need for a experienced expert with a lengthy practice. Such valuable persons in practice are regularly missing and their schooling is lengthily and expensive. Also one of the problems which appear is the transfer of the knowledge from the experienced experts onto the less-experienced experts. Because of the faster industry developm...
متن کاملTrain Wheel Abrasion, Measurement Method Using Contour Information
We present a method to recognize a complicated curved object from an image contour. We are developing a system that automatically measures train wheel abrasion from its contour image. Because a train wheel consists of a curved surface, the transformation of the image contour due to position variation affects the measurement accuracy. The 3D shape model of the train wheel is analyzed to compute ...
متن کاملSurface roughness and wear of resin cements after toothbrush abrasion.
Increased surface roughness and wear of resin cements may cause failure of indirect restorations. The aim of this study was to evaluate quantitatively the surface roughness change and the vertical wear of four resin cements subjected to mechanical toothbrushing abrasion. Ten rectangular specimens (15 × 5 × 4 mm) were fabricated according to manufacturer instructions for each group (n = 10): Nex...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nanomaterials
سال: 2020
ISSN: 2079-4991
DOI: 10.3390/nano10081445