Selection of a suitable multiresponse optimization technique for turning operation
نویسندگان
چکیده
منابع مشابه
Integration of grey-based Taguchi technique in optimization of parameters process during the turning operation of 16MnCr5 steel
CNC turning is widely used as a manufacturing process through which unwanted material is removed to get the high degree of surface rough. In this research article, Taguchi technique was coupled with grey relation analysis (GRA) to optimize the turning parameters for simultaneous improvement of productivity, average surface roughness (Ra), and root mean square roughness (Rq).Taguchi technique L2...
متن کاملSELECTION OF SUITABLE RECORDS FOR NONLINEAR ANALYSIS USING GENETIC ALGORITHM (GA) AND PARTICLE SWARM OPTIMIZATION (PSO)
This paper presents a suitable and quick way to choose earthquake records in non-linear dynamic analysis using optimization methods. In addition, these earthquake records are scaled. Therefore, structural responses of three different soil-frame models were examined, the change in maximum displacement of roof was analyzed and the damage index of whole structures was measured. The soil classifica...
متن کاملMultiresponse Optimization of Process Parameters in Turning of GFRP Using TOPSIS Method
Taguchi's design of experiment is utilized to optimize the process parameters in turning operation with dry environment. Three parameters, cutting speed (v), feed (f), and depth of cut (d), with three different levels are taken for the responses like material removal rate (MRR) and surface roughness (R a ). The machining is conducted with Taguchi L9 orthogonal array, and based on the S/N analys...
متن کاملUsing Gray Relational Analysis and Taguchi Technique in Solving Multi-objective Problems for Turning Operation of Austenitic Stainless Steel
In this study, the application of gray relational analysis (GRA) and Taguchi method in multi-criteria process parameters selection of turning operation has been investigated. The process responses under study are material removal rate (MRR) and surface roughness (SR); in turn, the input parameters include cutting speed, feed rate, depth of cut and nose radius of the cutting tool. The proposed a...
متن کاملInsert Selection for Turning Operation on CNC Turning Centre using MADM Methods
The effect of cutting tool insert geometry has significant role for surface finish in turning operation. There are many different types of tool inserts with different tool insert geometry are used in turning operation. This paper present a logical procedure to select best tool insert from alternative tool inserts for better surface finish in turning operation. The procedure based on three well ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Decision Science Letters
سال: 2016
ISSN: 1929-5804,1929-5812
DOI: 10.5267/j.dsl.2015.7.003