Seismic Stability of Buckling-Restrained Braced Frames
نویسندگان
چکیده
منابع مشابه
Performance-based Plastic Design Method for Buckling- Restrained Braced Frames
This paper presents the key design points of buckling-restrained braced frames (BRBFs) by using the performance-based plastic design (PBPD) methodology. This method is based on energy-work balance concept and uses pre-selected target drift and yield mechanism as design criteria. Based on multi-mode pushover and time-history analyses, a simple equation is developed for computing yield drift rati...
متن کاملSelection of Optimal Intensity Measure for Seismic Assessment of Steel Buckling Restrained Braced Frames under Near-Fault Ground Motions
Buckling restrained braces (BRBs) have a similar behavior under compression and tension loadings. Therefore, they can be applied as a favorable lateral load resisting system for structures. In the performance-based earthquake engineering (PBEE) framework, an intermediate variable called intensity measure (IM) links the seismic hazard analysis with the structural response analyses. An optimal IM...
متن کاملEvaluating the Performance of the Buckling Restrained Braces in Tall Buildings with peripherally braced frames
In recent years, seismic design of structures has been undergoing significant changes due to increasing demand for optimization and minimizing the level of damage and reducing the cost of structural repairs. Development of analytical methods and remarkable improvements of computer performance have been among the factors which influenced the design of structures. A lot of research has been condu...
متن کاملInvestigation of the Distribution of Cumulative Ductility Demand Parameter in Various Storeys of Buckling Restrained Braced Frames
Due to the fact that the buckling-restrained brace core yields subject to both tension and compression, it can adsorb energy and exhibit high ductility rendering it proper for tolerating earthquake loads. One of the important objectives of seismic standards is safeguarding the appropriate ductility for the structures because the structures, in case of being ductile, can dissipate a considerable...
متن کاملPerformance of BRBF System and Comparing it with the OCBF
Buckling-Restrained Braced Frame system(BRBFs) are a new type of steel seismic-load-resisting system that has found use in several countries because of its efficiency and its promise of seismic performance far superior to that of conventional braced frames. The system is addressed in the 2005 edition of the AISC Seismic Provisions for Structural Steel Buildings, also a set of design provisions ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2018
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.763.924