منابع مشابه
Effect of Fling-Step on Seismic Response of Steel Eccentrically Braced Frame Structures
Fling-step and forward directivity are two important characteristics of near-field earthquakes. Forward directivity occurs when the rupture propagates toward the site and arises in fault‐normal direction for strike‐slip faults. Fling-step is the consequence of permanent ground displacement imposed by near-field earthquakes and arises in strike-slip faults in the strike parallel direction. Fling...
متن کاملSeismic Retrofit of Bridge Steel Truss Pier Anchorage Connections
In assessments of the seismic adequacy of existing steel bridges, the steel-to-concrete anchorage connections typically found at the base of steel truss piers can be potentially vulnerable, having little to no ductility and inadequate strength to resist seismic demands. Many other non-ductile failure locations may also exist along the seismic load path. Failure would result in unacceptable perf...
متن کاملEnergy-Based Design Criterion of Dissipative Bracing Systems for the Seismic Retrofit of Frame Structures
Direct sizing criteria represent useful tools in the design of dissipative bracing systems for the advanced seismic protection of existing frame structures, especially when incorporated dampers feature a markedly non-linear behaviour. An energy-based procedure is proposed herein to this aim, focusing attention on systems including fluid viscous devices. The procedure starts by assuming prefixed...
متن کاملSeismic Safety and United States Design Practice for Steel-concrete Composite Frame Structures
In United States design practice, three system performance factors (R, Cd, and o) characterize the inelastic behavior of structures and are a crucial component of common elastic design methodologies. However, for steel-concrete composite frame systems these factors have been selected based on comparisons to more traditional and well-studied reinforced concrete and structural steel frame system...
متن کاملSeismic Response of a Platform-Frame System with Steel Columns
Timber platform-frame shear walls are characterized by high ductility and diffuse energy dissipation but limited in-plane shear resistance. A novel lightweight constructive system composed of steel columns braced with oriented strand board (OSB) panels was conceived and tested. Preliminary laboratory tests were performed to study the OSB-to-column connections with self-drilling screws. Then, th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Pollack Periodica
سال: 2020
ISSN: 1788-1994,1788-3911
DOI: 10.1556/606.2020.15.2.10