Seismic response of steel fibre reinforced concrete beam–column joints
نویسندگان
چکیده
منابع مشابه
Seismic Response of Reinforced Concrete Columns
There are a large number of reinforced concrete buildings in seismically active areas of the world that are not built in accordance with modern seismic design provisions such as those published by American Concrete Institution ([ACI] Committee 318, 2008). In the United States and other parts of the developed world, these buildings were constructed between 1930s to mid 1970s according to the bui...
متن کاملPunching shear strength of steel fibre reinforced concrete slabs
The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...
متن کاملSeismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall
In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...
متن کاملStrength and Permeability Characteristics of Steel Fibre Reinforced Concrete
The results reported in this paper are the part of an extensive laboratory investigation undertaken to study the effects of fibre parameters on the permeability and strength characteristics of steel fibre reinforced concrete (SFRC). The effect of varying fibre content and curing age on the water permeability, compressive and split tensile strengths of SFRC was investigated using straight steel ...
متن کاملMechanical Properties of Hybrid Fibre Reinforced Concrete With Steel And
The experimental study deals with Hybrid fibre reinforced concrete with the use of (Polypropylene and Recycled polyethylene terephthalate RPET). The M40 grade concrete used was designed by using IS10262-2009 code. The steel fibre and synthetic fibre were added at the volume fractions up to 0.5%. Test results showed that the fibres, when used in a hybrid form, could result in superior composite ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Structures
سال: 2014
ISSN: 0141-0296
DOI: 10.1016/j.engstruct.2013.10.046