Seismic response of secondary structures mounted on ductile frames
نویسندگان
چکیده
منابع مشابه
The Effect of Tuned Mass Damper on Seismic Response of Building Frames with Uncertain Structural Characteristics
Tuned mass dampers (TMDs) could be used to absorb the input energy of the applied load, and reduce the response of the building frames. However, the effectiveness of TMD in reducing the response of the building frames could be affected by inherited uncertainties in the structural characteristics of the frames. In this study, in order to investigate the probabilistic response of steel moment-res...
متن کاملSeismic Response of Building Structures with Sliding Non-structural Elements
Interaction between a structure under base excitation and heavy non-structural elements that it supports is significant in the seismic analysis and design of the structure. Heavy non-structural elements may slide/rock under base excitation, and this dynamic action affects the seismic behavior of the supporting structure. Hence, in this study, a numerical model was presented to describe the seis...
متن کاملThe Effect of Axial Force Variations on Nonlinear Modeling and Seismic Response of Reinforced Concrete Structures
In order to increase the accuracy of evaluating seismic response of structures, it is critical to conduct dynamic analyses based upon precise nonlinear models being as consistent as possible with the real conditions of corresponding structures. The concentrated plasticity model including one elastic element and two nonlinear spring elements at both ends has been considered within the research c...
متن کاملEffect of Fling-Step on Seismic Response of Steel Eccentrically Braced Frame Structures
Fling-step and forward directivity are two important characteristics of near-field earthquakes. Forward directivity occurs when the rupture propagates toward the site and arises in fault‐normal direction for strike‐slip faults. Fling-step is the consequence of permanent ground displacement imposed by near-field earthquakes and arises in strike-slip faults in the strike parallel direction. Fling...
متن کاملseismic upgrading of non-ductile steel frames using steel plate shear walls
many old damaged and undamaged building structures do not meet the criteria of modern seismic design codes. such structures need to be seismically enhanced. the main objective of this paper is to propose and validate the effectiveness of an upgrade scheme for non-seismic buildings using steel plate shear walls (spsw). the upgrade is carried out considering a probability-based drift-based criter...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PAMM
سال: 2008
ISSN: 1617-7061
DOI: 10.1002/pamm.200810273