Seismic resistance of reinforced concrete-masonry shear walls with high steel percentages
نویسندگان
چکیده
منابع مشابه
Seismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall
In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...
متن کاملSeismic Performance of Reinforced Concrete Frames Infilled by Masonry Walls with Different Heights
This study carried out comparative seismic performance of reinforced concrete frames infilled by masonry walls with different heights. Partial and fully infilled reinforced concrete frames were modeled for the research objectives and the analysis model for a bare reinforced concrete frame was also established for comparison. Non–linear static analyses for the studied frames were performed to in...
متن کاملEffect of Unreinforced Masonry Infill Walls on Seismic Performance of Reinforced Concrete Framed Structures
Unreinforced Masonry infill walls (URM) are commonly used in the Reinforced Concrete (RC) framed structures as interiors and exteriors partition walls. Although they usually are not considered in the structural analysis and design, their influence on the seismic performance of the framed structures is significant. A common practice in the modern and old RC buildings is to remove the URM walls i...
متن کاملEffect of Mortar Type on the Seismic Response of Partially Grouted Reinforced Masonry Shear Walls
Since the establishment of ASTM standard C91, masonry cement mortars have become widely used for masonry construction in low to moderate seismic regions. However, the Masonry Standards Joint Committee Code prohibits the use of masonry cement mortars in lateral force resisting systems for structures that fall into Seismic Design Categories D, E, and F. The general objective of this study is to e...
متن کاملSimulation of Nonlinear Seismic Response of Reinforced Concrete Structural Walls
In this study the performance of three macro-models in predicting the nonlinear response of different walls is investigated. The macro-models used are: Equivalent Beam Model, Multiple Vertical Line Element Model and a shear panel model developed by Massone et al. (2006). The walls are classified as slender, intermediate, and squat walls according to their shear-span ratio. First, three single w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the New Zealand Society for Earthquake Engineering
سال: 1977
ISSN: 2324-1543,1174-9857
DOI: 10.5459/bnzsee.10.1.1-16