SEISMIC PERFORMANCE OF REINFORCED CONCRETE HIGH PIER WITH HOLLOW SECTION
نویسندگان
چکیده
منابع مشابه
Seismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall
In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...
متن کاملSeismic Performance Analysis of FRP Reinforced Concrete Frame Structure
Based on the experimental study for seismic performance of FRP reinforced concrete beam-column joints, two-storey two-span plane frames were taken for examples, in which the static elastoplastic analysis (the pushover method) was carried on the joints of the FRP strengthened concrete frames, and then the comparative analysis was made on seismic performance of RFP strengthened frame structure th...
متن کاملDamage-Based Seismic Performance Evaluation of Reinforced Concrete Frames
A damage-based approach for the performance-based seismic assessment of reinforced concrete frame structures is proposed. A new methodology for structural damage assessment is developed that utilizes response information at the material level in each section fiber. The concept of the damage evolution is analyzed at the section level and the computed damage is calibrated with observed experiment...
متن کاملSeismic Response of Reinforced Concrete Columns
There are a large number of reinforced concrete buildings in seismically active areas of the world that are not built in accordance with modern seismic design provisions such as those published by American Concrete Institution ([ACI] Committee 318, 2008). In the United States and other parts of the developed world, these buildings were constructed between 1930s to mid 1970s according to the bui...
متن کاملHigh Performance Reinforced Concrete Beams made with Sandstone Reactive Aggregates
An investigation on the flexural behaviour of reinforced high performance concrete (HPC) has been conducted. Crushed sandstone known as reactive aggregate was used for both fine and coarse aggregates. In addition, mineral admixtures such as silica fume and fly ash combined with superplasticiser was used. The beams were made with concrete having compressive strength in the range of 74 88 N/mm 2 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1999
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1999.613_103