Seismic performance evaluation and risk assessment of typical reinforced concrete frame buildings with masonry infill and conventional vertical extension in Nepal

Effect of Unreinforced Masonry Infill Walls on Seismic Performance of Reinforced Concrete Framed Structures

Unreinforced Masonry infill walls (URM) are commonly used in the Reinforced Concrete (RC) framed structures as interiors and exteriors partition walls. Although they usually are not considered in the structural analysis and design, their influence on the seismic performance of the framed structures is significant. A common practice in the modern and old RC buildings is to remove the URM walls i...

Study the Reinforced Concrete Frame with Brick Masonry Infill due to Lateral Loads

In the building construction, framed structures are frequently used due to ease of construction and rapid progress of work. Masonry infill panels have been widely used as interior and exterior partition walls for aesthetic reasons and functional needs. When infill walls are omitted in a particular storey, a soft storey is formed compared to much stiffer other stories. The masonry infill has bee...

Influence of Infill Panels and their Distribution on Seismic Behavior of Existing Reinforced Concrete Buildings

Infills can highly influence the seismic response of a Reinforced Concrete (RC) building: generally speaking, their presence leads to an increase in global stiffness and strength, but their brittle behavior can result in an increase of displacement demand if a certain threshold of seismic intensity is overcome. Moreover, presence of infills often leads to a change in the collapse mechanism comp...

Probabilistic assessment of the seismic damage in reinforced concrete buildings

The main objective of this article is to assess the expected seismic damage in reinforced concrete buildings from a probabilistic point of view by using Monte Carlo simulation. To do that, the seismic behavior of the building is studied by using random capacity obtained by considering the mechanical properties of the materials as random variables. Starting from the capacity curves, one can obta...

Effects of Vertical Ground Motion on Seismic Performance of Reinforced Concrete Flat-Plate Buildings