Seismic performance and retrofit of precast concrete grouted sleeve connections

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Shear Performance of Horizontal Joints in Short Precast Concrete Columns with Sleeve Grouted Connections under Cyclic Loading

In this study, two short precast concrete columns and two cast-in-situ concrete columns were tested under cyclic loads. It was shown that the sleeve grouted connection was equivalent to the cast-in-situ connections for short columns when the axial compression ratio was 0.6. In order to determine the influence of the axial compression ratio and the shear-span ratio on the shear capacity of the h...

متن کامل

Seismic Design Considerations for Precast Concrete Shear Wall Connections

The performance of precast shear wall panel structures subjected to earthquakes relies on the behaviour and integrity of the connections between the panels. The current lack of knowledge on the seismic behaviour of precast wall connections limits the use of such systems in earthquake areas. This paper presents results of an extensive experimental program undertaken at the University of Manitoba...

متن کامل

Seismic behavior of semi-dry precast concrete connections using tapered thread couplers

The worldwide use of precast concrete frames leads to an increase in the need for the investigation of efficient precast connections, particularly in the seismic regions. The current paper provides a numerical and experimental study on a dry precast connection. Experiments were conducted to validate the finite element method in the laboratory of the University of Science and Culture. To verify ...

متن کامل

Design of Hybrid Precast Concrete Walls for Seismic Regions

This paper presents an ongoing research project on the behavior and design of “hybrid” precast concrete wall structures for use in seismic regions. Hybrid precast walls utilize a combination of mild (e.g., Grade 60) steel and high-strength unbonded post-tensioning (PT) steel for flexural resistance across horizontal joints. The mild steel reinforcement is designed to yield in tension and compre...

متن کامل

Seismic Retrofit of Bridge Steel Truss Pier Anchorage Connections

In assessments of the seismic adequacy of existing steel bridges, the steel-to-concrete anchorage connections typically found at the base of steel truss piers can be potentially vulnerable, having little to no ductility and inadequate strength to resist seismic demands. Many other non-ductile failure locations may also exist along the seismic load path. Failure would result in unacceptable perf...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: PCI Journal

سال: 2012

ISSN: 0887-9672

DOI: 10.15554/pcij.01012012.97.109