Seismic Isolation for Buildings. Earthquake Isolation Floor System Using Laminated Rubber Bearings.

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Adaptive fuzzy control for earthquake-excited buildings with lead rubber bearing isolation

This study examines the feasibility of applying adaptive fuzzy sliding mode control (AFSMC) strategies to reduce the dynamic responses of buildings constructed using a lead rubber bearing (LRB) isolation hybrid protective system. Recently developed control devices for civil engineering structures, including hybrid systems and semi-active systems, have been found to have inherent nonlinear prope...

متن کامل

Use of Shape Memory Alloys with Laminated Rubber Bearings in Seismic Isolation of Multi-Span Continuous Moderate to Strong Seismic Zones

This study is devoted towards evaluating seismic performance of a three-span continuous highway bridge subjected to moderate to strong earthquake ground motions in its longitudinal direction. In this regard, nonlinear dynamic analysis of the bridge based on the direct time integration approach using the 4 order Runge-Kutta method is conducted. Two types of isolation bearings are used in the ana...

متن کامل

Multi-axial Active Isolation for Seismic Protection of Buildings

Structural control technology has been widely accepted as an effective means for the protection of structures against seismic hazards. Passive base isolation is one of the common structural control techniques used to enhance the performance of structures subjected to severe earthquake excitations. Isolation bearings employed at the base of a structure naturally increase its flexibility, but con...

متن کامل

Design of Base Isolation System for Buildings

The concept and theory of base isolation system are widely accepted at the present. To accomplish the predicted behaviours of the base-isolated buildings, the design for base isolation system is regarded as the dominant factor of the success of isolated buildings. Although the base isolation design can be fulfilled using Uniform Building Code 1997, conceptual design is yet necessarily analyzing...

متن کامل

Semi-active Base isolation System for Buildings using MR Dampers

Due to limitations on the use of passive base isolation systems which show poor performance in near field seismic excitations or active systems which require high external power, as stand alone control devices for a range of seismic excitations, a hybrid control system that mitigates the limitations of either passive or active control systems is preferred. The present study examines the use of ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: NIPPON GOMU KYOKAISHI

سال: 1997

ISSN: 1884-0442,0029-022X

DOI: 10.2324/gomu.70.456