Seismic attenuation imaging with causality

Relative Seismic Attenuation Estimation

The end goal of any solid Earth study is to better constrain physical parameters of the Earth (e.g. viscosity, temperature, and mineral composition). As we are unable to directly measure many of these quantities, past a few kilometers in depth, we must content ourselves with indirect estimates by way of experiment and theory. Just as geochemists do this by way of compositional deviations from p...

Seismic Wave Attenuation in Carbonates

Causality Analysis of Frequency Dependent Wave Attenuation

The work is inspired by thermo-and photoacoustic imaging, where recent efforts are devoted to take into account attenuation and varying wave speed parameters. In this paper we derive and analyze causal equations describing propagation of attenuated pressure waves. We also review standard models, like frequency power laws, and the thermo-viscous equation and show that they lack causality in the ...

Operational status of TAMA300 with the seismic attenuation system (SAS)

TAMA300 has been upgraded to improve the sensitivity at low frequencies after the last observation run in 2004. To avoid the noise caused by seismic activities, we installed a new seismic isolation system—the TAMA seismic attenuation system (SAS). Four SAS towers for the test-mass mirrors were sequentially installed from 2005 to 2006. The recycled Fabry–Perot Michelson interferometer was succes...

Seismic Attenuation Characterization Using Tracked Vehicles

Target classification is one of the most important issues in battlefield situational awareness. As seismic signals are an effective means of obtaining such information, any knowledge of the subsurface environment in which the target signal propagates is very important in either developing or fine-tuning classification algorithms. Seismic signal attenuation is an essential subsurface environment...