Secondary Hardening Behavior in Super Duplex Stainless Steels during LCF in Dynamic Strain Ageing Regime

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Secondary Hardening Behavior in Super Duplex Stainless Steels during LCF in Dynamic Strain Ageing Regime

Cyclic deformation behaviors in five modified duplex and 350°C. The influence of temperature and ni phenomenon, in the stress response curve was focuse dynamic strain ageing by increasing the first hardeni Furthermore, an increase in nitrogen concentration in ageing temperature range. The occurrence of strai structures. The formation of irreversible dislocation s hardening in the stress respons...

متن کامل

Super Plasticity of /α Duplex Stainless Steels

In this paper the studies of the two-phase super Plasticity stainless steels is studied. The aim of this study obtained the suitable criteria to thermo-mechanical treatment condition for decrease the microstructure (grain size) and super plasticity property in two-phase stainless steels. Also here we want to show the appropriate ranges of temperature and strain rate used in the process super pl...

متن کامل

Effect of Secondary Phase Precipitation on the Corrosion Behavior of Duplex Stainless Steels

Duplex stainless steels (DSSs) with austenitic and ferritic phases have been increasingly used for many industrial applications due to their good mechanical properties and corrosion resistance in acidic, caustic and marine environments. However, DSSs are susceptible to intergranular, pitting and stress corrosion in corrosive environments due to the formation of secondary phases. Such phases are...

متن کامل

Duplex Hardening of Steels for Aeroengine Bearings

Duplex hardening is a process in which conventional heat-treatments such as secondary or case hardening are followed up by surface nitriding to achieve exceptional properties, particularly in the context of aeroengine bearings. Hardness values in excess of 1 000 HV can in principle be achieved, and although the hardness decreases as a function of depth below the surface, some level of enhanceme...

متن کامل

Dynamic Strain Ageing and Eac of Deformed Nitrogen-alloyed Aisi 316 Stainless Steels

Intergranular stress corrosion cracking has occurred in BWR environments in non-sensitised, cold-worked austenitic stainless steel materials. The affecting parameters are so far not fully known, but deformation mechanisms may be decisive. The effect of cold deformation and nitrogen content on the deformation behaviour of austenitic stainless steels was investigated. The materials were austeniti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Procedia Engineering

سال: 2013

ISSN: 1877-7058

DOI: 10.1016/j.proeng.2013.03.230