Screening Single Phase Laminar Convective Heat Transfer of Nanofluids in a Micro-tube

Measurement of Local Convective Heat Transfer Coefficient of Alumina-Water Nanofluids in a Double Tube Heat Exchanger

Heat transfer coefficient and thermal efficiency of γ-Al2O3/water nanofluids flowing through a double tube heat exchanger were experimentally investigated. The nanoparticles were well dispersed in distilled water at 0.05–0.15 %vol. A large number of experiments were performed at different fluid flow rates under turbulent flow regime (18,000<Re<40,000) and various nanofluid...

Convective Heat Transfer Enhancement of CNT-Water Nanofluids in Plain Tube Fitted with Wire Coil Inserts

Convective Heat Transfer of Laminar, Single-phase Flow in Randomly Rough Microtubes

Convective heat transfer of laminar, single-phase flow in rough microtubes is studied. Wall roughness and slope are assumed to possess Gaussian, isotropic distributions. Fractal concepts are used to model the rough microtube. It is shown that due to the existence of wall roughness, both cross-sectional and inside surface areas are increased. A new concept is defined as a figure of merit for ass...

Effect of Prandtl number on internal convective heat transfer in laminar single-phase pulsating flows

In this paper, heat transfer during simultaneously developing singlephase laminar flow inside a pipe has been investigated numerically. A two dimensional axisymmetric model of a circular mini-channel is used, with a constant wall temperature boundary condition. In the present simulations, flow Reynolds number (Re) and amplitude ratio (A) are kept constant to 200 and 0.2, respectively. The varia...

Numerical Study of Laminar Flow and Convective Heat Transfer Utilizing Nanofluids in Equilateral Triangular Ducts with Constant Heat Flux

This study numerically investigates heat transfer augmentation using water-based Al₂O₃ and CuO nanofluids flowing in a triangular cross-sectional duct under constant heat flux in laminar flow conditions. The Al₂O₃/water nanofluids with different volume fractions (0.1%, 0.5%, 1%, 1.5%, and 2%) and CuO/water nanofluids with various volume fractions (0.05%, 0.16%, 0.36%, 0.5%, and 0.8%) are employ...