منابع مشابه
Flexible screen printed thick film thermoelectric generator with reduced material resistivity
This work presents a flexible thick-film Bismuth Tellurium/Antimony Tellurium (BiTe/SbTe) thermoelectric generator (TEG) with reduced material resistivity fabricated by screen printing technology. Cold isostatic pressing (CIP) was introduced to lower the resistivity of the printed thermoelectric materials. The Seebeck coefficient (α) and the resistivity (ρ) of printed materials were measured as...
متن کاملAn Implantable Low-cost Multilayer Screen-printed Carbon Thick-film Strain Sensor
We present a rapid low-cost process for fabrication of screen-printed carbon thick-film strain sensors with 0.012% strain resolution. The sensors are suitable for implantation and designed specifically for strain or fullness measurements of the skin and bladder, respectively. Thick-film carbon paste sensors are screen-printed using an etched brass screen onto polydimethylsiloxane (PDMS) and enc...
متن کاملDispenser-printed planar thick-film thermoelectric energy generators
This work presents advancements in dispenser-printed thick film thermoelectric materials for the fabrication of planar and printable thermoelectric energy generators. The thermoelectric properties of the printed thermoelectric materials were measured as a function of temperature. The maximum dimensionless figures of merit (ZTs) at 302 K for the n-type Bi2Te3-epoxy composite and the p-type Sb2Te...
متن کاملPost ionized defect engineering of the screen-printed Bi2Te2.7Se0.3 thick film for high performance flexible thermoelectric generator
Flexible thermoelectric generators (f-TEGs), fabricated by the screen printing technique, have been introduced as a semi-permanent power source for wearable and flexible electronic systems. However, the output power density of the f-TEG module is still limited due to the low ZT of the screen-printed thermoelectric (TE) film. We herein report a post ionized defect engineering process that effect...
متن کاملThe Effect on Performance of Fabrication Parameter Variations of Thick-Film Screen Printed Silver/Silver Chloride Potentiometric Reference Electrodes
Thick-film screen printed silver-silver chloride (Ag/AgCl) reference electrodes have been fabricated and investigated as an alternative to liquid electrolyte Ag/AgCl reference electrodes. The performance of the electrodes was examined with variations of the potassium chloride (KCl) concentration in the final (top) layer of the electrode. Also, different types of binder (glass and polymer) were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2005
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02711254