Screen-printable Type S Thermocouple for Thick-film Technology
نویسندگان
چکیده
منابع مشابه
Transparent Film Technology for Touch Screen and Flexible Display Applications
Flexible electronic displays and touch screens are increasingly used in demanding outdoor environments. Design engineers are challenged to develop optical systems that meet a wide thermal range (-55° to + 85° C) and comply with diverse optical, electrical and mechanical parameters. This paper discusses the optical and mechanical properties of substrates and thin and thick film coatings used in ...
متن کاملCO2 Selective Potentiometric Sensor in Thick-film Technology
A potentiometric sensor device based on screen-printed Nasicon films was investigated. In order to transfer the promising sensor concept of an open sodium titanate reference to thick film technology, "sodium-rich" and "sodium-poor" formulations were compared. While the "sodium-rich" composition was found to react with the ion conducting Nasicon during thermal treatment, the "sodium-poor" refere...
متن کاملApplication of thick film technology in mass production of biosensors.
Thick film technology is known to be a widely used tool for the fabrication of electronic circuits. It is normally based on the screen-printing and firing of various pastes differing in composition and electrical properties under different firing temperature. They are then classified as conductor, resistor, dielectric, and soldering pastes.1 Recently, the application of thick film technology ha...
متن کاملA Highly Thermostable In₂O₃/ITO Thin Film Thermocouple Prepared via Screen Printing for High Temperature Measurements.
An In₂O₃/ITO thin film thermocouple was prepared via screen printing. Glass additives were added to improve the sintering process and to increase the density of the In₂O₃/ITO films. The surface and cross-sectional images indicate that both the grain size and densification of the ITO and In₂O₃ films increased with the increase in annealing time. The thermoelectric voltage of the In₂O₃/ITO thermo...
متن کاملScreen Printing Process Design of Experiments for Fine Line Printing of Thick Film Ceramic Substrates
Screen printing has been the dominant method of thick film deposition because of its low cost. Many experiments in industry have been done and many models of the printing process have been developed since the 1960’s. With a growing need for denser packaging and a drive for higher pin count, screen printing has been refined to yield high resolution prints. However, fine line printing is still co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2015
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2015.08.692