<scp>Pull‐out</scp> behavior of polymer fibers in concrete

نویسندگان

چکیده

Abstract The bond between polymer fibers and the surrounding cementitious matrix is essential for development of concrete reinforcement. single fiber pull‐out test (SFPT) standard characterization technique testing strength. However, different phases debonding cannot be distinguished by SFPT. This study investigates from with a modified SFPT proposes methods to change setup generate more valuable information on mechanism. was equipped linear variable differential transformers (LVDT), digital image correlation (DIC) acoustic emission (AE) analysis. results demonstrate that allows better understanding during pull‐out. Furthermore, strength values calculated reveal chemical investigated polymers not as reported previous studies. Deformation measurements performed using LVDTs DIC are suitable measuring techniques characterize mechanism in A recorded AE found.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Flexural Behavior of Polyester Polymer Concrete Subjected to Different Chemicals

Polymer concrete (PC) is a composite material prepared by resin and aggregates. Advantages of polymer concretes include rapid curing at ambient temperatures, high flexural and compressive strengths, excellent chemical resistance and low permeability. In this research, a comparative study was performed on degradation of polyester resin concrete in different chemical solutions. Polymer concrete s...

متن کامل

Mechanical Behavior of Self-Compacting Reinforced Concrete Including Synthetics and Steel Fibers

This paper investigated the effects of combining fibers with self-consolidating concrete (SCC). 12 series of test specimens were prepared using three kinds of fibers including steel, polyphenylene sulfide (PPS) and glass fibers with four different volumes fractions and one specimen without fibers as a reference sample. All plans were subjected to fresh concrete tests. For mechanical behavior of...

متن کامل

Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers

Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...

متن کامل

Luffa fibers and gamma radiation as improvement tools of polymer concrete

This work presents a study on the effects of luffa fibers and gamma radiation as tools for mechanical improvement of polymer concrete based on a polyester resin/foundry sand mixture. Different concentrations of irradiated and non-irradiated fibers (0.3, 0.6 and 0.9 wt%) and higher irradiation doses were used. The results show that the compressive strength and flexural strength values decrease g...

متن کامل

Strength and Toughness of Reinforced Concrete with Coated Steel Fibers

The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of polymer science

سال: 2023

ISSN: ['1542-9385', '0098-1273']

DOI: https://doi.org/10.1002/pol.20230264