Scour formation due to simultaneous circular impinging jet and wall jet
نویسندگان
چکیده
منابع مشابه
Numerical simulation of liquid-layer breakup on a moving wall due to an impinging jet
Jet-wiping is a hydrodynamic method for controlling the liquid film thickness in a coating process. In industrial conditions, the jet is generally turbulent. When the jet wipes a liquid film, it usually induces violent film instability called splashing. The instability is characterized by the ejection of droplets from the runback flow. Consequently, it can degrade the final coating quality sinc...
متن کاملExperimental Investigation of Bed Variations due to Circular Culvert Jet with Different Angles
Downfall flows from different outlet hydraulic structures such as culverts and jetsthrowingtothe erodible downstream bed cause scour hole and changes in the downstream bed topography. Therefore,by performing some physical modeling tests on culvert jet flow under different angles, changes in the downstream bed topography under the effect of different parameters such as flow rate, depth of the ta...
متن کاملScour Caused by Three-Dimensional Submerged Square Wall Jet: Sand Deposition in Scour Hole and Ridge
Laboratory tests were carried out to assess the local scour by three-dimensional wall jets from a square crosssection nozzle. To this end, three different tailwater depths were used and the jet expansion ratio was held greater than ten. Velocity measurements were conducted using a one component laser Doppler anemometer. The jet exit Reynolds number was maintained to 1x10 and this value can be c...
متن کاملTurbulent characteristics in flow subjected to bed suction and jet injection as a pier-scour countermeasure
The effect of a combined system of the bed suction and jet injection as a pier-scour countermeasure on the turbulent flow field is studied in a laboratory flume using an Acoustic Doppler Velocimeter (ADV). The three components of the velocities in the vertical symmetry plane in the equilibrium scour hole in front and rear of the pier under 3-jet injections and bed suction rate Qs/Q0 = 2%located...
متن کاملDeformation of a liquid surface due to an impinging gas jet: A conformal mapping approach
A theoretical and experimental study is performed on the deformation of a free surface between two fluids in a gravitational field, due to a jet in the lighter fluid impinging at right angles to the surface. For the two-dimensional case, we present a mathematical model using the method of conformal mapping. The strength of our method lies in its general application to analytically study the int...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Hydraulic Research
سال: 2012
ISSN: 0022-1686,1814-2079
DOI: 10.1080/00221686.2012.694174