Scintillation properties of ((CH<sub>3</sub>)<sub>4</sub>N)<sub>3</sub>BiCl<sub>6</sub> as a novel lead-free perovskite halide crystal

نویسندگان

چکیده

Abstract Two-dimensional hybrid organic-inorganic perovskites (2D-HOIPs) possess intriguing structural properties which makes them promising materials for diverse optical, electronic and scintillation applications. Recently, several classes of exhibit potential candidate radiation detection. However, the corrugated-type 2D-HOIPs have not been studied so far. In this work, we investigate performance bismuth chloride ((CH 3 ) 4 N) BiCl 6 lead-free candidate. No strong RL intensity at room temperature is observed due to a thermal quenching. A small negative quenching also observed, infer presence trap states characterized by two activation energies: E 1 = 25.71 meV ${E}_{2}$?> 2 129.27 meV. addition, low afterglow 10 K estimated be 70 s (14.5%) 1200 (85.5%). thermoluminescence exhibits broad band, attributed quasi-continuous distribution shallow traps. All these results shed some light on fundamentals bismuth-based perovskites.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

X-ray Scintillation in Lead Halide Perovskite Crystals

Current technologies for X-ray detection rely on scintillation from expensive inorganic crystals grown at high-temperature, which so far has hindered the development of large-area scintillator arrays. Thanks to the presence of heavy atoms, solution-grown hybrid lead halide perovskite single crystals exhibit short X-ray absorption length and excellent detection efficiency. Here we compare X-ray ...

متن کامل

Hybrid Lead Halide Iodide and Lead Halide Bromide in Efficient Hole Conductor Free Perovskite Solar Cell

In this work we used CH3NH3PbInBr3−n (where 0 ≤ n ≤ 3) as hole conductor and light harvester in the solar cell. Various concentrations of methylammonium iodide and methylammonium bromide were studied which reveal that any composition of the hybrid CH3NH3PbInBr3−n can conduct holes. The hybrid perovskite was deposited in two steps, separating it to two precursors to allow better control of the p...

متن کامل

Lead-free solid-state organic–inorganic halide perovskite solar cells

Lead-free solution-processed solid-state photovoltaic devices based on methylammonium tin iodide (CH3NH3SnI3) perovskite semiconductor as the light harvester are reported. Featuring an optical bandgap of 1.3 eV, the CH3NH3SnI3 perovskite material can be incorporated into devices with the organic hole-transport layer spiro-OMeTAD and show an absorption onset at 950 nm, which is significantly red...

متن کامل

A lead-halide perovskite molecular ferroelectric semiconductor

Inorganic semiconductor ferroelectrics such as BiFeO3 have shown great potential in photovoltaic and other applications. Currently, semiconducting properties and the corresponding application in optoelectronic devices of hybrid organo-plumbate or stannate are a hot topic of academic research; more and more of such hybrids have been synthesized. Structurally, these hybrids are suitable for explo...

متن کامل

Ultrathin Colloidal Cesium Lead Halide Perovskite Nanowires.

Highly uniform single crystal ultrathin CsPbBr3 nanowires (NWs) with diameter of 2.2 ± 0.2 nm and length up to several microns were successfully synthesized and purified using a catalyst-free colloidal synthesis method followed by a stepwise purification strategy. The NWs have bright photoluminescence (PL) with a photoluminescence quantum yield (PLQY) of about 30% after surface treatment. Large...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials research express

سال: 2022

ISSN: ['2053-1591']

DOI: https://doi.org/10.1088/2053-1591/ac9270