Scanning electron microscope fine tuning using four-bar piezoelectric actuated mechanism
نویسندگان
چکیده
منابع مشابه
the scanning electron microscope
it is only thirteen years since the scanning electron microscope has been available commercially. yet, even in this short period of time, this instrument has been a powerful tool in the investigation of topography, electrical and magnetic properties, crystal structure, cathodoluminescent characteristics etc. of solid specimens. today, this type of microscope has opened its place alongside the c...
متن کاملInverse Dynamics of Redundantly Actuated Four-bar Mechanism Using an Optimal Control Formulation
Closed kinematic chain mechanisms are extensively used in several applications, from machine tools to biomechanical models. A few works however address the mechanics of these systems with redundant actuation, i.e., with more actuators than degrees of freedom. The inverse dynamics analysis of this kind of system does not possess an unique solution, and therefore optimization procedures should be...
متن کاملUltra-fine Tracking Control on Piezoelectric Actuated Motion Stage Using Piezoelectric Hysteretic Model
The tracking control accuracy of the piezoelectric actuator (PEA) is limited due to its inherent hysteresis nonlinearity. A new piezoelectric-actuator model is synthesized based on two first-order transfer systems in parallel with two tuned parameters determined from one experiment. Two open-loop tracking controllers are implemented with the proposed model to compensate the hysteresis of linear...
متن کاملThe Scanning Confocal Electron Microscope
The Scanning Confocal Electron Microscope, is an instrument which permits the observation and characterization of sub-surface structures of thick, optically opaque materials at nanometer level resolutions. The instrument merges the capabilities of the scanning, transmission and x-ray microscopes, and achieves unprecedented resolutions in optically dense materials, by implementing the technology...
متن کاملStudying of various nanolithography methods by using Scanning Probe Microscope
The Scanning Probe Microscopes (SPMs) based lithographic techniques have been demonstrated as an extremely capable patterning tool. Manipulating surfaces, creating atomic assembly, fabricating chemical patterns, imaging topography and characterizing various mechanical properties of materials in nanometer regime are enabled by this technique. In this paper, a qualified overview of diverse lithog...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Electrical Engineering
سال: 2018
ISSN: 1339-309X
DOI: 10.1515/jee-2018-0003