Scalable Fabrication of MXene‐PVDF Nanocomposite Triboelectric Fibers via Thermal Drawing (Small 6/2023)
نویسندگان
چکیده
Nanocomposite Triboelectric Fibers In article number 2206107, Mustafa Ordu and co-workers demonstrate the strategy for single-step scalable fabrication of MXene-polyvinylidene fluoride (PVDF) nanocomposite fibers. The thermal drawing process has potential to fabricate fibers in kilometers length necessary textile electronic industries. triboelectric are capable energy harvesting biomotion analysis.
منابع مشابه
Modeling the Fabrication of Hollow Fibers: Capillary Drawing
A method for modeling the fabrication of small-scale hollow glass capillaries is developed. The model is based on an asymptotic analysis of the Navier-Stokes equations, which yields a simple closed-form solution for this problem. We demonstrate the validity of this approach using experimental data and use it to make predictions for a range of regimes of interest for the development of microstru...
متن کاملinvestigation of thermal comfort properties of woven sport fabric using blend of estabragh fibers
امروزه لباس در نظر ورزشکاران و کسانی که برای اوقات فراغت خود و یا برای رسیدن به اندامی متعادل، ورزش می کنند؛ بسیار با اهمیت است. احساس مطلوب از لباس در زمره خصوصیات راحتی پوشش می باشد. خصوصیات انتقال رطوبت لباس، در ارزیابی راحتی حسی و حرارتی منسوجات تولید شده از آن ها بسیار مهم است. هدف از این تحقیق، معرفی پارچه جدید است که متشکل از الیاف استبرق با خواص منحصر به فرد می باشد. استبرق لیف طبیعی تو...
Fabrication of Nanoporous Fibers via Bubble Electrospinning
Recently, nanoporous fibers have been caught much attention as the most promising material in nanotechnology. To our knowledge, nanoporous materials have extremely high surface area and are widely used in different fields, such as filtration, radiation protection, catalysis, sensors, tissue engineering, and drug delivery [1-2]. Electrospinning is an effective method, which can fabricate polymer...
متن کاملFabrication of polymer-SiO2 nanocomposite optical fibers with a new method
At first step polymer optical fibers (POFs) are used in short distance for optical data transmissions. At second step SiO2 nanoparticles were prepared by sonochemical-assisted method. Silica nanoparticles were added to polymer matrix to prepare polymer based nanocomposites. Most of the POF applications are in the medical and electrical devices. There are several methods for fabrication of POFs,...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Small
سال: 2023
ISSN: ['1613-6829', '1613-6810']
DOI: https://doi.org/10.1002/smll.202370038