Sand Slurry Erosive Wear Behavior of Hot Extruded Al6061-SiC Composites
نویسندگان
چکیده
منابع مشابه
Comparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites
In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...
متن کاملSynthesis and Sintering of Ti3SiC2–SiC Composites through Reactive Hot-Pressing of TiC and Si Precursors
MAX phases are an attractive class of layered solids that have recently attracted a great deal of attention due to their unusual and unique composition. The ternary compound Ti3SiC2 is an example of a material that combines the properties of ceramics and metals. As a ceramic, they are high stiff. Some of them are resistant to oxidation, creep, fatigue, corrosion. They are extremely refractory a...
متن کاملبررسی ریز ساختار و مقاومت فرسایشی کامپوزیت‌های زمینه Al-Ti تقویت شده بوسیله ذرات SiC و Al2O3
In this research, the production of Aluminum matrix composites (AMCS) consolidated by hot powder extrusion along with physical and mechanical properties of extruded bars have been studied. The matrix alloy was prepared from elemental powders of Al and 10wt% Ti. The composites comprises 5,10,15 or 20 vol% SiC or Al2O3 particles with an average size of 5 micron. The powder mixtures were sealed ...
متن کاملA Study on the Aging Behavior of Al6061 Composites Reinforced with Y2O3 and TiC
Abstract: The reinforcement particles play important roles in determining microstructural development and properties of Al6061 composites. In the present work, the aging behavior of Al6061 reinforced with Y2O3 and TiC particles produced via mechanical alloying are investigated. The results indicate that the peak-aged Al6061 alloy without reinforcement demonstrates the highest hardness, which co...
متن کاملEffect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion
In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Minerals and Materials Characterization and Engineering
سال: 2011
ISSN: 2327-4077,2327-4085
DOI: 10.4236/jmmce.2011.106037