Sand-Erosion Behavior of Al-CuAl<SUB>2</SUB> Lamellar Eutectic Alloys
نویسندگان
چکیده
منابع مشابه
Damping Capacity of Hypo-Eutectic Zn-Al Alloys
Damping capacity of hypo-eutectic Zn-Al alloys as a function of rolling ratio is investigated. Effect of heat treatment after cold rolling on the damping capacity is discussed. Damping tests were carried out using the method of the free decay of vibrations in bending oscillation. With an increase in rolling reduction, the damping capacity was increased. As the results of tensile and hardness te...
متن کاملGrowth directions in directionally solidified Al–Zn and Zn–Al alloys near eutectic composition
Growth directions and crystallographic orientations of solidification microstructures have been measured in Al–Zn alloy near the eutectic composition. Al dendrites in Al–92 wt.% Zn alloy were found to grow along the h110i directions while Zn dendrites in Al– 96 and 98 wt.% Zn have h10 10i trunks. In the lamellar eutectic, a crystallographic relationship has been found between the dense plane of...
متن کاملLamellar eutectic growth with anisotropic interphase boundaries
We present a numerical study of the effect of a free-energy anisotropy of the solidsolid interphase boundaries on the formation of tilted lamellar microstructures during directional solidification of nonfaceted binary eutectic alloys. We used two different methods – phase-field (PF) and dynamic boundary-integral (BI) – to simulate the growth of periodic eutectic patterns in two dimensions. For ...
متن کاملThe roles of Eu during the growth of eutectic Si in Al-Si alloys
Controlling the growth of eutectic Si and thereby modifying the eutectic Si from flake-like to fibrous is a key factor in improving the properties of Al-Si alloys. To date, it is generally accepted that the impurity-induced twinning (IIT) mechanism and the twin plane re-entrant edge (TPRE) mechanism as well as poisoning of the TPRE mechanism are valid under certain conditions. However, IIT, TPR...
متن کاملStudy of Heterogeneous Nucleation of Eutectic Si in High-Purity Al-Si Alloys with Sr Addition
Al-5 wt pct Si master-alloys with controlled Sr and/or P addition/s were produced using super purity Al 99.99 wt pct and Si 99.999 wt pct materials in an arc melter. The master-alloy was melt-spun resulting in the production of thin ribbons. The Al matrix of the ribbons contained entrained Al-Si eutectic droplets that were subsequently investigated. Differential scanning calorimetry, thermodyna...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1993
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.57.1_88