Sampling related issues in pod-based model reduction of simplified circulating fluidised bed combustor model
نویسندگان
چکیده
منابع مشابه
Characteristics of distinct ash flows in a biomass thermal power plant with bubbling fluidised bed combustor
Characteristics of biomass used as fuel and distinct ash flows in a thermal power plant with BFBC (bubbling fluidised bed combustion) technology were studied. An integrated approach involving chemical composition, microscopy analysis, mineralogy, and thermal behaviour were used to characterize the ash. The ashes have a low unburned content, typically below 3 wt.% (dry basis), with higher values...
متن کاملmortality forecasting based on lee-carter model
over the past decades a number of approaches have been applied for forecasting mortality. in 1992, a new method for long-run forecast of the level and age pattern of mortality was published by lee and carter. this method was welcomed by many authors so it was extended through a wider class of generalized, parametric and nonlinear model. this model represents one of the most influential recent d...
15 صفحه اولcost benefits of rehabilitation after acute coronary syndrome in iran; using an epidemiological model
چکیده ندارد.
Fluidised bed drying of soybeans.
The fluidised bed drying characteristics of soybeans at high temperatures (110-140 degrees C) and moisture contents, 31-49% dry basis, were modelled using drying equations from the literature. Air speeds of 2.4-4.1 m/s and bed depths from 10 to 15 cm were used. The minimum fluidised bed velocity was 1.9 m/s. From a quality point of view, fluidised bed drying was found to reduce the level of ure...
متن کاملAn Improved Sparge Pipe Air Distribution System for a Fluidised Bed Combustor
The purpose of the air distribution system in a fluidised bed combustor is to provide a reasonably uniform spread of combustion air over the entire horizontal cross-sectional area of the bed. One of the simplest, and hence cheapest, forms of air distributor is the sparge pipe design, in which an array of horizontal pipes is fitted at the base of the bed. Combustion air is then supplied to one e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical and Process Engineering
سال: 2015
ISSN: 2300-1925
DOI: 10.1515/cpe-2015-0026