SAFETY OF CARBON FIBRE REINFORCED PLASTIC HOLLOW SECTIONS IN COMPRESSION
نویسندگان
چکیده
منابع مشابه
Machining of Fibre Reinforced Plastic Composite Materials
Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...
متن کاملAssessment of the Exit Defects in Carbon Fibre-Reinforced Plastic Plates Caused by Drilling
This paper investigates the formation of the exit defects in carbon fibre-reinforced plates and characterizes their features in terms of drilling conditions. It was found that spalling and fuzzing are the major mechanisms of exit defects. The spalling, consisting of a main region and a secondary region, is caused by chisel and cutting edge actions, in which the former plays a key role. The fuzz...
متن کاملAntenna Patterns from Single Slots in Carbon Fibre Reinforced Plastic Waveguides
Slotted Waveguide Antenna Stiffened Structure (SWASS) is a type of conformal load-bearing antenna where top-hat cross-section stiffeners on skins, or blade stiffeners in sandwich panels, serve the dual purpose of acting both as structural stiffeners and as waveguides. Cutting slots through the outer skin and into these waveguide stiffeners creates slotted waveguide antenna arrays. Two of the ke...
متن کاملImage Characterization of Carbon Fibre Reinforced Composites
A new methodology to detect fibres orientation in composite materials, using image processing tools is introduced. Several examples with manufacturing defects are studied using RIMAPS technique and the Variogram method. The characterization is made from digitized images of the samples. Combined use of RIMAPS and Variogram analyses identified the orientation of fibres and determined the values o...
متن کاملEffect of ply configuration on hollow square reinforced concrete columns confined with Carbon fibre-reinforced polymer (CFRP)
This paper presents results of testing twelve hollow square reinforced concrete specimens wrapped with Carbon fibre reinforced polymer CFRP. The effect of ply configuration on the behaviour of the specimens is investigated. All specimens were 800mm high and had the dimensions of 200mm× 200mm in cross-section and a hollow core of 80mm× 80mm. The specimens were divided into four groups with three...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nigerian Journal of Technology
سال: 2016
ISSN: 2467-8821,0331-8443
DOI: 10.4314/njt.v35i4.8