Running Safety Analysis of Railway Vehicle passing through Curve depending on Rail Inclination Change
نویسندگان
چکیده
منابع مشابه
Impact of vehicle seat back inclination on occupational driving safety
This study determined effect of automobile seat backrest inclination on lattisimus dorsi muscle electromyographic (EMG) activity. Myoelectric activity was determined at two seat backrest angles (90 degrees and 100 degrees inclinations). Twenty-one (21) participants were engaged in the study. Electromygraphic activity at 90 degrees inclination had slope value of -0.065 mV/minute while ...
متن کاملLateral Stability Analysis of High-Speed Railway Vehicle on Curve
A vehicle body, two bogie frames and two wheelsets for each bogie frame are used to describe the railway vehicle model. The system dynamic is modeled using a 38-DOF system including the longitudinal, lateral, vertical, roll, pitch and yaw displacements. A heuristic nonlinear creep model and the elastic rail are used to simulate the wheel-rail contact. Stable movement and the corresponding limit...
متن کاملBifurcation Analysis of High-Speed Railway Vehicle in a Curve
In order to prevent unpleasant incidents, preservation high-speed railway vehicle stability has vital importance. For this purpose, railway vehicle is modeled using a 38-DOF. This paper presents an investigation on limit cycle and bifurcation of high speed railway behavior. It is revealed that the critical hunting speed decreases by increasing the wheel conicity. Also the critical hunting speed...
متن کاملContact Force Estimation in the Railway Vehicle Wheel-Rail Interface
Increased patronage of railways in the UK in the past 20 years has put demands on rolling stock to operate at peak availability with reduced time available for maintenance. One possible tool to enable this is the use of real time fault detection and diagnosis on board railway vehicles to detect faulty components and provide information about the current running condition of the system. This pap...
متن کاملImpacts of Wheel–rail at Railway Turnouts
Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh-
Timoshenko beam elements. The ra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Korean Society for Noise and Vibration Engineering
سال: 2013
ISSN: 1598-2785
DOI: 10.5050/ksnve.2013.23.3.199