Running-in and micropitting behaviour of steel surfaces under mixed lubrication conditions
نویسندگان
چکیده
منابع مشابه
A STUDY ON WEAR RATES OF 100Cr6 STEEL RUNNING AGAINST SINTERED STEEL SURFACES UNDER DRY AND STARVED LUBRICATION
This paper investigates the tribological behavior of 100Cr6 steel pin running against sintered steel bearing material used in hermetic compressors. Tests were conducted under dry and starved lubrication sliding conditions in air at room temperature. Although porous structure acts as crack initiation sites thus limiting the wear resistance of sintered iron in dry sliding conditions under high co...
متن کاملEffect of Surface Texturing on Cast Iron Reciprocating against Steel under Cyclic Loading in Boundary and Mixed Lubrication Conditions
This study investigates the effect of laser surface texturing on the friction behavior of grey cast iron reciprocating under boundary, mixed lubrication conditions and cyclic loading. Four geometrical parameters of micro-textures (feature depth, feature diameter, area fraction, and sliding direction) were studied using a design of experiments (DoE) approach. The results showed that depending on...
متن کاملGeneration of Acoustic Emission from the running-in and subsequent micropitting of a mixed-elastohydrodynamic contact
This paper presents the use of Acoustic Emission to study the running-in and subsequent micropitting of a pair of hardened steel surfaces under mixed lubrication conditions. These surfaces were loaded together under rolling/sliding conditions typical of heavily loaded gearing. Relocation profilometry was used to measure the rapid running-in process and the development of micropits. Acoustic emi...
متن کاملTribological Characteristics of the Surface Layer of Steel Modified with Boron under Mixed Friction Conditions
The aim of the present work is to determine the influence of technologically produced boron surface layers on the friction parameters in the sliding pairs under mixed friction conditions. The current boronizing processes allow obtaining surface layers of high hardness and high resistance to corrosion and wear, with low brittleness and no tendencies towards cracking However, the operation charac...
متن کاملFatigue strength evaluation of self-piercing riveted cold rolled steel joints under mixed mode loading conditions
Fatigue strength of cross-shaped specimens of SPR joints made of SPCC was evaluated at load angles of 0°, 45°, and 90°. For the static strength at load angles of 0°, 45°, and 90°, the maximum loads were determined to be 4890N, 1969N, and 1611N, respectively. Regarding for the relationship between the load amplitude and the number of cycles (Nf), the results were 014 . 0 3 . 2209 − = f amp N P ,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology International
سال: 2016
ISSN: 0301-679X
DOI: 10.1016/j.triboint.2016.03.007