Rubber friction on road surfaces: Experiment and theory for low sliding speeds
نویسندگان
چکیده
منابع مشابه
Rubber friction for tire tread compound on road surfaces.
We have measured the surface topography and calculated the surface roughness power spectrum for an asphalt road surface. For the same surface we have measured the friction for a tire tread compound for velocities 10(-6) m s(-1) < v < 10(-3) m s(-1) at three different temperatures (at -8 °C, 20 °C and 48 °C). The friction data was shifted using the bulk viscoelasticity shift factor a(T) to form ...
متن کاملRubber friction: comparison of theory with experiment.
We have measured the friction force acting on a rubber block slid on a concrete surface. We used both unfilled and filled (with carbon black) styrene butadiene (SB) rubber and have varied the temperature from -10 °C to 100 °C and the sliding velocity from 1 μm/s to 1000 μm/s. We find that the experimental data at different temperatures can be shifted into a smooth master-curve, using the temper...
متن کاملSliding friction at a rubber/brush interface.
We study the friction of a poly(dimethylsiloxane) (PDMS) rubber network sliding, at low velocity, on a substrate on which PDMS chains are end-tethered. We thus clearly evidence the contribution to friction of the pullout mechanism of chain ends that penetrate into the network. This interfacial dissipative process is systematically investigated by probing the velocity dependence of the friction ...
متن کاملOn the theory of rubber friction
Rubber exhibits unusual sliding friction. When rubber is slid on a hard, rough substrate, the surface asperities of the substrate exert oscillating forces on the rubber surface leading to energy ‘‘dissipation’’ via the internal friction of the rubber. I estimate this contribution to the friction force and compare the results with the experimental data of Grosch. Because of its low elastic modul...
متن کاملExperiment of Ultimate Shear Failure and Friction Sliding Performance of Rubber Bearings of Bridges
The results showed that (1) the ultimate shear deformation of the rubber bearings with two fixed end plates reached 300% to 400% of the rubber layer thickness. The damage was mainly focused on the rubber layer fracture. The energy dissipation capacity of the bearings was weak, and the hysteresis curve presented a narrow zonal shape. (2) The rubber bearings with unilateral friction sliding had a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Chemical Physics
سال: 2015
ISSN: 0021-9606,1089-7690
DOI: 10.1063/1.4919221