Rubber friction and tire dynamics

Rubber friction and tire dynamics.

We propose a simple rubber friction law, which can be used, for example, in models of tire (and vehicle) dynamics. The friction law is tested by comparing numerical results to the full rubber friction theory (Persson 2006 J. Phys.: Condens. Matter 18 7789). Good agreement is found between the two theories. We describe a two-dimensional (2D) tire model which combines the rubber friction model wi...

Rubber friction for tire tread compound on road surfaces.

We have measured the surface topography and calculated the surface roughness power spectrum for an asphalt road surface. For the same surface we have measured the friction for a tire tread compound for velocities 10(-6) m s(-1) < v < 10(-3) m s(-1) at three different temperatures (at -8 °C, 20 °C and 48 °C). The friction data was shifted using the bulk viscoelasticity shift factor a(T) to form ...

Rubber Oxidation and Tire Aging - a Review

While a new tire may have excellent resistance to crack initiation and propagation between the steel belts, an aged tire of the exact same construction can exhibit dramatically reduced crack growth resistance, which in some cases may contribute to tire failure. This article will review the research that has gone into quantifying the rate of oxidation the steel belt rubber oxidizes in different ...

Estimation of Tire-Road Friction by Tire Rotational Vibration Model

Tire-road friction is the most important piece of information used by active safety systems. However, most conventional friction estimation/ detection methods are accurate only within the non-linear region. In addition, such methods require numerous sensors, such as yaw rate sensors, acceleration sensors, and steering angle sensors. In this paper, a friction estimation method using a tire vibra...

Reactive Processing of Silica-reinforced Tire Rubber