Roughness effects on contact angle measurements
نویسندگان
چکیده
منابع مشابه
In situ non-contact measurements of surface roughness
Surface roughness measurements are often required to validate a machining process. However, when using a 3D surface roughness measuring instruments it is usually necessary to remove the part from the machine tool between two operations, potentially introducing systematic errors. Furthermore, surface roughness measuring instruments are not suited for measuring heavy and large parts such as stamp...
متن کاملthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Multi-Observations Initial Orbit Determination based on Angle-Only Measurements
A new approach with the ability to use the multiple observations based on the least square approach has been proposed for initial orbit determination. This approach considers the Earth’s Oblateness by using the developed Lagrange coefficients. The efficiency of the proposed method has been tested in two scenarios. The first scenario is to use the simulated and the second one is to utilize the r...
متن کاملAssessing the accuracy of contact angle measurements for sessile drops on liquid-repellent surfaces.
Gravity-induced sagging can amplify variations in goniometric measurements of the contact angles of sessile drops on super-liquid-repellent surfaces. The very large value of the effective contact angle leads to increased optical noise in the drop profile near the solid-liquid free surface and the progressive failure of simple geometric approximations. We demonstrate a systematic approach to det...
متن کاملSurface tension and contact angle measurements of a hexadecyl imidazolium surfactant adsorbed on a clay surface
The surface tension of 1,2-dimethyl-3-N-hexadecyl imidazolium tetrafluoroborate (Im BF4) as a function of concentration has been measured. Between 10−5 and 4× 10−4 mol/L, the surface tension decreases with increasing imidazolium concentration. Aggregate formation appears to occur at a concentration near 4× 10−4 mol/L for temperatures between 50 and 75 ◦C. Small angle neutron scattering measurem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Physics
سال: 2008
ISSN: 0002-9505,1943-2909
DOI: 10.1119/1.2952446