Rotor optimization for synchronous reluctance motors
نویسندگان
چکیده
منابع مشابه
Optimum Design Parameters for Synchronous Reluctance Motors
A series of synchronous reluctance motors (RSM) are analysed using finite element methods. The amount of iron in each rotor is kept the same. It is shown that the saliency ratio is not only dependent on the flux guide reluctance factor but also on the position or span of flux guides. It is also shown that an axially laminated design may not be an optimum configuration due to large number of flu...
متن کاملRotor Geometry Parameter Optimization of Synchronous Reluctance Motor Using Taguchi Method
In this paper the effect of rotor geometry parameters on the d-axis and q-axis inductance of synchronous reluctance machines is investigated and an optimum design parameter combination is achieved to improve the saliency ratio as well as the performance of drive system. The 2D finite-element model of synchronous reluctance machine is used to construct the Taguchi design of experiments. The leve...
متن کاملDesign Optimization of Synchronous Reluctance Motor for low Torque Ripple
The aim of this paper is to optimize the design of multiple flux barriers Synchronous reluctance motor in order to smooth the torque profile without rotor skewing. A new strategy is proposed by modelling the particular optimal design problem as mixed integer constrained minimization of a suitable objective function. The procedure has allowed to optimize the rotor shape for minimum torque ripple...
متن کاملReluctance Force Magnetic Suspension Characteristics and Control for Cylindrical Rotor Bearingless Motors
In this paper, the modeling and control of reluctance-force-based magnetic suspension in cylindrical rotor, ring-shape air gap, bearingless motors are presented. The full suspension system dynamics, including both the destabilizing force due to the motor field and the active magnetic suspension control forces, are modeled, and a transfer function of the bearingless motor suspension plant is der...
متن کاملTorque Ripple Reduction in Switched Reluctance Motors by Rotor Poles Shape and Excitation Pulse Width Modification
In this paper, at first, a 24/16 three-phase switched reluctance motor is designed, then the rotor poles shape tips corrected for reduction ripple of single-phase torque waveform. By doing this, the single-phase torque waveform has a flat surface and consequently, the single-phase torque ripple is reduced. Also, due to the commutation between the machine phases, the torque drops during this tim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CES Transactions on Electrical Machines and Systems
سال: 2019
ISSN: 2096-3564
DOI: 10.30941/cestems.2019.00036