Rotational effects on the flow field inside a leading edge impingement cooling passage
نویسندگان
چکیده
منابع مشابه
the effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Rotational accelerations stabilize leading edge vortices on revolving fly wings.
The aerodynamic performance of hovering insects is largely explained by the presence of a stably attached leading edge vortex (LEV) on top of their wings. Although LEVs have been visualized on real, physically modeled, and simulated insects, the physical mechanisms responsible for their stability are poorly understood. To gain fundamental insight into LEV stability on flapping fly wings we expr...
متن کاملOn the stabilization of leading-edge vortices with spanwise flow
The influence of spanwise flow on the development and stabilization of leading-edge vortices (LEVs) on a foil (without rotational acceleration) has been investigated. The plunging swept wing/fin geometry used in this study, characteristic of fish-like tails, has been found to be insufficient in the stabilization of LEVs. Direct force measurements and visualizations, including Particle Image Vel...
متن کاملnumerical investigation of delta wings leading edge configuration effects on the flow behavior using large eddy simulation approach
determining characteristics and behavior of fluid flow and obtaining the aerodynamic coefficients are important and considerable tasks in investigation of flow over the bodies. in this research, leading edge radius effects on the flow behavior over a delta wing with a sweep angle of 50 degree at different reynolds numbers between 0.5×106 and 2.5×106 are investigated numerically. three different...
متن کاملDraft Gt2003-38118 Experimental and Numerical Investigation of Impingement on a Rib-roughened Leading-edge Wall
Leading edge cooling cavities in modern gas turbine airfoils play an important role in maintaining the leading edge temperature at levels consistent with airfoil design life. These cavities often have a complex cross-sectional shape to be compatible with the external contour of the blade at the leading edge. Furthermore, to enhance the heat transfer coefficient in these cavities, they are often...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Experimental Thermal and Fluid Science
سال: 2016
ISSN: 0894-1777
DOI: 10.1016/j.expthermflusci.2016.03.004