Rotating Loosening Mechanism of Nut Connecting Rotary Disc under Rotating-Bending Force.
نویسندگان
چکیده
منابع مشابه
Frictional torque on a rotating disc
Resistance to motion often includes a dry frictional term independent of the speed of an object and a fluid drag term varying linearly with speed in the viscous limit. (At higher speeds, quadratic drag can also occur.) Here, measurements are performed for an aluminium disc mounted on bearings that is given an initial twist and allowed to spin until it comes to a stop. It is found that a sum of ...
متن کاملFGM ROTATING DISC FABRICATE BY Al/Al2O3
Our aim of is to develop a processing method for a rotating disc made of functionally graded materials (FGM), by stacking the slurry, layer by layer in a radial direction. A three-layer functionally graded material of Al/Al2O3 is fabricated with compositions of 10, 20, 30 vol.% Al2O3. The ceramic composition increases from the discs inner (centre) to the outer. The combination of these material...
متن کاملSteady Thermal Stresses in a Thin Rotating Disc of Finitesimal Deformation with Mechanical Load
Seth’s transition theory is applied to the problems of thickness variation parameter in a thin rotating disc by finite deformation. Neither the yield criterion nor the associated flow rule is assumed here. The results obtained here are applicable to compressible materials. If the additional condition of incompressibility is imposed, then the expression for stresses corresponds to those arising ...
متن کاملAssessment of different methods for fatigue life prediction of steel in rotating bending and axial loading
Generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. The present paper investigates the effect of a notch on the fatigue life of the HSLA100 (high strength low alloy) steel which is widely applicable in the marine industry. Tensile test was conducted on specimens and mechanical properties were obtain...
متن کاملPerformance of Rotating Solar Still with Rotating External Reflectors (RESEARCH NOTE)
In this research, a rotating solar still that uses external bottom reflectors was experimentally investigated. The solar still and reflectors have the capability to shift their angle with respect to the south and the reflectors have the capability to shift their angle with respect to the horizon. The experiment has been performed in both fixed and rotating states. For the fixed state the solar ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 2002
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.68.3705