ROTARY ULTRASONIC MACHINING OF CARBON FIBER-REINFORCED POLYMER: FEASIBILITY STUDY
نویسندگان
چکیده
منابع مشابه
Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملBehavior of Coupling Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets
In this research, using the results of 6 tests, the effect of Carbon Fiber Reinforced Polymer (CFRP) sheets on the behavior of reinforced concrete coupling beams of shear walls is studied. First, in the experimental part of the study, four coupling beams with different reinforcements were manufactured and tested. Then, after the failure of the specimens, two of them were rehabilitated and stren...
متن کاملMeasure Release Agent on a Polymer Reinforced with Carbon Fiber
Release agents are applied as a liquid that forms a thin film coating to aid removal of carbon-fiber-reinforced polymer (CFRP) parts from a mold or peel ply. This process, however, leads to inevitable contact transfer, causing release agent to remain on the part or repair. Before painting or bonding of the CFRP component to other structures, proper post-treatment to remove vaporizable component...
متن کاملRotary ultrasonic machining of ceramics: design of experiments
Rotary ultrasonic machining is one of the nontraditional machining processes for advanced ceramics. Currently available in literature are publications on theoretical and experimental studies on material removal rates in rotary ultrasonic machining. However, there is no report on the systematic study of the cutting force in rotary ultrasonic machining. Furthermore, the effects of some process pa...
متن کاملRotary ultrasonic machining of silicon carbide: designed experiments
Silicon carbide (SiC) has found a variety of engineering applications due to its superior properties. However, it is still desirable to study cost-effective processes to machine silicon carbide. This paper presents the results of a designed experimental investigation into Rotary Ultrasonic Machining (RUM) of silicon carbide. A four-variable two-level full factorial design was employed to reveal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Machining Science and Technology
سال: 2012
ISSN: 1091-0344,1532-2483
DOI: 10.1080/10910344.2012.698962