Rotary-centrifugal shredder for forage preparation
نویسندگان
چکیده
منابع مشابه
Magnetic drive system for a new centrifugal rotary blood pump.
The purpose of this investigation was to design a novel magnetic drive and bearing system for a new centrifugal rotary blood pump (CRBP). The drive system consists of two components: (i) permanent magnets within the impeller of the CRBP; and (ii) the driving electromagnets. Orientation of the magnets varies from axial through to 60 degrees included out-lean (conical configuration). Permanent ma...
متن کاملPumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps
This standard specifies requirements and gives recommendations for sealing systems for centrifugal and rotary pumps used in the petroleum, natural gas, and chemical industries. See A.1.1 and A.1.2. It is the responsibility of the purchaser or seal vendor to ensure that the selected seal and auxiliaries are suitable for the intended service condition. It is applicable mainly for hazardous, flamm...
متن کاملLarge-volume Centrifugal Microfluidic Device for Whole Blood Sample Preparation
This paper reports a novel centrifugal microfluidic device for integrated sample preparation of large-volume whole blood samples for nucleic acid analysis. We present a device capable of processing 2 milliliters of undiluted blood while still allowing for the integration with downstream amplification and detection steps. In biological validation experiments, this device was shown to yield separ...
متن کاملModification of a Self - Propelled Rotary Mower for Wheat Forage Harvest
Many field experiments require the collection of forage yields in addition to grain yield (small grains). ln smal! plot research, mechanized grain harvest is common. However, forage harvest is often accomplished by hand which is time consuming and labor intensive. Sample heterogeneity increases when forage harvest is obtained by hand. The objectives of this study were to construct a mechanized ...
متن کاملProTaper rotary instrument fracture during root canal preparation: a comparison between rotary and hybrid techniques.
AIMS This study aimed to compare the frequency of ProTaper rotary instrument fracture with rotary (conventional) and hybrid (rotary and hand files) canal preparation techniques. Secondary objectives were to determine whether there was an association of ProTaper file fracture with the canal curvature and to compare the mean time required for canal preparation in the two techniques. METHODS An ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2020
ISSN: 2267-1242
DOI: 10.1051/e3sconf/202022201020