Room Temperature Superplaticity in Fine/Ultrafine Grained Materials Subjected to Severe Plastic Deformation
نویسندگان
چکیده
منابع مشابه
Applications of Differential Scanning Calorimetry on Materials Subjected by Severe Plastic deformation
Differential Scanning Calorimetry (DSC) is a thermal analysis technique that measures the energy absorbed or released by a sample as a function of temperature or time. DSC has wide application for analysis of solid state reactions and solid-liquid reactions in many different materials. In recent years, DSC has been applied to analyze materials and alloys processed through Severe Plastic Deforma...
متن کاملNano- and Micro-mechanical Properties of Ultrafine-Grained Materials Processed by Severe Plastic Deformation Techniques
The processing of metals through the application of severe plastic deformation (SPD) techniques provides the potential for achieving exceptional grain refinement leading to ultrafine-grained (UFG) materials in bulk solids. These materials generally exhibit high strength but very limited ductility at room temperature (RT) leading to the so-called paradox of strength and ductility. The recent dev...
متن کاملSuperplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation
The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained a...
متن کاملMICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE ULTRAFINE-GRAINED COPPER TUBE PRODUCED BY SEVERE PLASTIC DEFORMATION
In this paper, cyclic flaring and sinking (CFS) as a new severe plastic deformation (SPD) method was employed to produce the ultrafine grain (UFG) copper tubes. The extra friction has eliminated in the CFS method that provided the possibility for production of longer UFG tubes compared to the other SPD methods. This process was done periodically to apply more strain and consequently finer grain...
متن کاملSevere Plastic Deformation of Metals
This paper provides an introduction in the field of severe plastic deformation (SPD). First of all the main methods to produce SPD materials are discussed. In the following section, the mechanisms leading to the formation of fine grains are reviewed and the influence of changes in strain path is highlighted. During post-SPD thermal annealing, some typical microstructural changes take place. The...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2019
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.mf201922