Rolling Contact Fatigue of Hot-Pressed Sialon Balls.

Rolling Contact Fatigue in Ultra High Vacuum

Rolling Balls and Octonions

In this semi-expository paper we disclose hidden symmetries of a classical nonholonomic kinematic model and try to explain the geometric meaning of the basic invariants of vector distributions. DOI: 10.1134/S0081543807030030

Analysis of Surface Crack Growth under Rolling Contact Fatigue

Understanding the fatigue crack growth phenomenon in railheads requires a study of driving forces such as the crack tip opening and sliding displacements, under repeated rolling contact. Finite element simulations, allowing elastic-plastic deformation, and mixed-mode crack growth laws were utilized to demonstrate that the fatigue crack growth rates display a minimum after a finite amount of cra...

Rolling contact fatigue of surface coatings—a review

The aim of this review is to survey the state of the art relating to the rolling contact fatigue (RCF) investigation of various overlay coatings and also, to ascertain the influence of design parameters such as the type of deposition process, coating material and thickness on the RCF performance. Rolling contact fatigue is a significant factor in the failure of components in rolling/sliding con...

Modeling the strain-rate dependence of fatigue life of hot- pressed silicon nitride

This paper presents the results of a micromechanical model used to explain the strain-rate dependence of the compression fatigue lives of amorphous and crystalline grain boundary phase; denoted by ABP and CBP silicon nitrides, respectively. When the strain-rate is changed from 400 to 0.01/s, the fatigue lives of both materials, evaluated at a peak stress of 3.2 GPa, increased by more than two o...