ROAD BITUMEN MODIFIED BY RUBBER CRUSH OBTAINED FROM WASTE TIRES
نویسندگان
چکیده
منابع مشابه
Removal of No2 on Active Carbons Obtained from Waste Tires
Introduction The production of scrap tires only in the EU, USA and Japan is around 6 million tones per year. As the associated automotive industries grow the huge quantity of waste tires presently produced in the world will certainly increase in the future [1]. Thus the disposal of scrap tires becomes a serious environmental problem. The production of activated carbons from solid wastes is one ...
متن کاملRheological properties of modified Bitumen: Comparison of waste polymers’ performance
In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...
متن کاملA Study of Chunk Rubber from Recycled Tires as a Road Construction Material
The feasibility of using large rubber chunks from shredded tires as aggregates in coldmixes for road construction was investigated in this study. The research was directed toward development of a chunk rubber asphalt concrete mix design for low volume road construction using local aggregate, shredded tire rubber chunks and a cationic emulsion. A set of mixes using different combinations of chun...
متن کاملComparative Study of Eva and Waste Polymer Modified Bitumen
Polymer-modified bitumen is used to combat different pavement distresses and to increase the life span of pavement. Unmodified bitumen cannot perform better with the range extreme minimum and maximum pavement temperatures. The polymers commonly used to modify the bitumen are ethylene vinyl acetate (EVA) styrene butadiene styrene (SBS). The aim this study to compare the performance of EVA modifi...
متن کاملGasification of Waste Tires
Gasification is a thermochemical pathways used to convert carbonaceous feedstock into syngas (CO and H2) in deprived oxygen environment. The process can accommodate conventional feedstock such as coal as well as discarded waste including plastics, rubber, and even MSW due to the high reactor temperature of 1000 to 1600oC. Pyrolysis is another conversion pathway yet it is more selective to the c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Problems of Gathering, Treatment and Transportation of Oil and Oil Products
سال: 2021
ISSN: 1998-8443
DOI: 10.17122/ntj-oil-2021-3-105-115